Skip to main content

AP® Statistics Unit 4 flashcardsInference for Quantitative Data: Means

27 cards · about 7 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 27
Due
27
Mastered
0 / 27
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Sampling distribution of x̄

    For random samples of size n: mean μ and standard deviation σn\frac{\sigma}{\sqrt{n}}. Bigger samples give sample means that vary less.

    Topic 4.1: Sampling Distributions for Sample Means

  • Normal shape for x̄

    x̄ is normal if the population is normal, and approximately normal if n ≥ 30 (by the CLT). A strongly skewed population may need a bigger n.

    Topic 4.1: Sampling Distributions for Sample Means

  • t-distribution

    Symmetric and bell-shaped like the standard normal, but with heavier tails. As df increases, it gets closer to the standard normal.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Degrees of freedom (one sample)

    df = n − 1 for one-sample and paired t procedures. It tells you which t-distribution to use.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Critical value t*

    The t-value that matches your confidence level and df. It's bigger than z* for the same confidence, especially when df is small.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Standard error of x̄

    sn\frac{s}{\sqrt{n}}. It estimates the standard deviation of x̄ when you don't know σ, which is almost always.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • One-sample t-interval

    xˉ±t∗⋅sn\bar{x} \pm t^* \cdot \frac{s}{\sqrt{n}} with df = n − 1. It estimates a population mean μ.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Paired data

    Two measurements on the same unit or on matched units, like before and after scores. Analyze the differences as one sample.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Mean difference (μd)

    The population mean of the paired differences. A paired t-interval or t-test works on the sample of differences, using xˉd\bar{x}_d and sds_d.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Interpreting a t-interval

    "We are C% confident that the interval from __ to __ captures the true mean [variable in context]." It's about μ, not about individual values.

    Topic 4.3: Justifying a Claim Based on a Confidence Interval for a Population Mean or Population Mean Difference

  • Hypotheses for a mean

    H₀: μ = μ₀, with Hₐ: μ < μ₀, μ > μ₀ or μ ≠ μ₀. For paired data, H₀: μd=0\mu_d = 0.

    Topic 4.4: Setting Up a Test for a Population Mean or Population Mean Difference

  • Conditions for t procedures

    Random sample or randomized experiment; 10% condition when sampling without replacement; and a normal population, n ≥ 30, or no strong skew or outliers in the sample.

    Topic 4.4: Setting Up a Test for a Population Mean or Population Mean Difference

  • One-sample t statistic

    t=xˉ−μ0s/nt = \dfrac{\bar{x} - \mu_0}{s/\sqrt{n}}, with df = n − 1. It counts how many standard errors x̄ is from the null value.

    Topic 4.5: Carrying Out a Test for a Population Mean or Population Mean Difference

  • Sampling distribution of x̄₁ − x̄₂

    Mean μ₁ − μ₂ and standard deviation σ12n1+σ22n2\sqrt{\frac{\sigma_1^2}{n_1} + \frac{\sigma_2^2}{n_2}}, for independent random samples or a randomized experiment.

    Topic 4.6: Sampling Distributions for the Difference Between Two Sample Means

  • Variances add

    For independent samples, the variance of x̄₁ − x̄₂ is the sum of the two variances, even though you're subtracting the means.

    Topic 4.6: Sampling Distributions for the Difference Between Two Sample Means

  • Two-sample t-interval

    (xˉ1−xˉ2)±t∗⋅s12n1+s22n2(\bar{x}_1 - \bar{x}_2) \pm t^* \cdot \sqrt{\frac{s_1^2}{n_1} + \frac{s_2^2}{n_2}}. Technology gives the df. It estimates μ₁ − μ₂.

    Topic 4.7: Constructing a Confidence Interval for the Difference Between Two Population Means

  • Independent vs. paired samples

    Use two-sample t procedures for two separate groups. Use paired t procedures when each value in one group is linked to one value in the other.

    Topic 4.9: Setting Up a Test for the Difference Between Two Population Means

  • Hypotheses for two means

    H₀: μ₁ = μ₂ (or μ₁ − μ₂ = 0), with a one-sided or two-sided Hₐ. Define both parameters in context.

    Topic 4.9: Setting Up a Test for the Difference Between Two Population Means

  • Two-sample t statistic

    t=xˉ1−xˉ2−0s12n1+s22n2t = \dfrac{\bar{x}_1 - \bar{x}_2 - 0}{\sqrt{\frac{s_1^2}{n_1} + \frac{s_2^2}{n_2}}}. Use technology for the df and the p-value.

    Topic 4.10: Carrying Out a Test for the Difference Between Two Population Means

  • 0 in an interval for μ₁ − μ₂

    If 0 is inside the interval, "no difference" in means is plausible. If the whole interval is above or below 0, the means likely differ.

    Topic 4.8: Justifying a Claim Based on a Confidence Interval for the Difference Between Two Population Means

  • Randomized experiment conclusion

    With random assignment, a significant difference supports a cause-and-effect conclusion, but only for units like those in the study.

    Topic 4.10: Carrying Out a Test for the Difference Between Two Population Means

  • Robustness of t procedures

    t procedures still work well when the population isn't exactly normal, as long as there's no strong skew or outliers, especially for larger n.

    Topic 4.4: Setting Up a Test for a Population Mean or Population Mean Difference

  • Standard error vs. standard deviation

    The standard deviation s describes how individual values vary. The standard error sn\frac{s}{\sqrt{n}} describes how x̄ varies from sample to sample.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Effect of n on a t-interval

    A larger n shrinks sn\frac{s}{\sqrt{n}} and also shrinks t* (more df), so the interval gets narrower.

    Topic 4.3: Justifying a Claim Based on a Confidence Interval for a Population Mean or Population Mean Difference

  • Paired t-test

    A one-sample t-test on the differences, with H₀: μd=0\mu_d = 0 and t=xˉd−0sd/nt = \dfrac{\bar{x}_d - 0}{s_d/\sqrt{n}}, df = n − 1.

    Topic 4.5: Carrying Out a Test for a Population Mean or Population Mean Difference

  • Matched pairs t-interval

    xˉd±t∗⋅sdn\bar{x}_d \pm t^* \cdot \frac{s_d}{\sqrt{n}} with df = n − 1, where xˉd\bar{x}_d and sds_d come from the differences. It estimates μd\mu_d.

    Topic 4.2: Constructing a Confidence Interval for a Population Mean or Population Mean Difference

  • Conditions for a two-sample t-interval

    Two independent random samples (or random assignment), 10% condition for each sample, and both n ≥ 30 or no strong skew or outliers in either sample.

    Topic 4.7: Constructing a Confidence Interval for the Difference Between Two Population Means