AP® Physics 1: Algebra-Based Unit 2 flashcardsForce and Translational Dynamics
39 cards · about 10 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 39
- Due
- 39
- Mastered
- 0 / 39
This card: New
Flip the card before you rate it.
System
The object or group of objects you choose to study. Everything else is the environment, and only forces from the environment are external.
Topic 2.1: Systems and Center of Mass
Object model
Treating a system as one point-like object at its center of mass. It works when the system's size, shape and internal parts don't matter.
Topic 2.1: Systems and Center of Mass
Center of mass
The mass-weighted average position of a system: . External forces move the system as if all its mass sat there.
Topic 2.1: Systems and Center of Mass
Center of mass of a symmetric object
For a uniform, symmetric object it lies on every line of symmetry. A uniform ring's center of mass is at its center, where there's no material at all.
Topic 2.1: Systems and Center of Mass
Force
A push or pull from an interaction between two objects, measured in newtons (1 N = 1 kg·m/s²). It's a vector, and nothing can exert a force on itself.
Topic 2.2: Forces and Free-Body Diagrams
Contact force
A force between objects that touch, like the normal force, tension or friction. At the atomic level these come from electric forces between atoms.
Topic 2.2: Forces and Free-Body Diagrams
Free-body diagram
A dot for the object with one arrow for each force on it, pointing in the force's direction. On the AP exam, draw whole forces, never components.
Topic 2.2: Forces and Free-Body Diagrams
Normal force
The push a surface exerts on an object touching it, always perpendicular to the surface. It's often not equal to mg, for example on a ramp or in an elevator.
Topic 2.2: Forces and Free-Body Diagrams
Tension
The pull a string, rope or cable exerts along its length, always away from the object it's attached to. A string can pull but never push.
Topic 2.2: Forces and Free-Body Diagrams
Newton's third law
If A pushes or pulls on B, B pushes or pulls on A with a force equal in size and opposite in direction. The two forces act on different objects.
Topic 2.3: Newton’s Third Law
Third-law pair
The two forces in one interaction, like Earth pulling a book down and the book pulling Earth up. They never appear on the same free-body diagram.
Topic 2.3: Newton’s Third Law
Internal force
A force between two parts of the same system. Internal forces come in third-law pairs that cancel, so they can't change the motion of the center of mass.
Topic 2.3: Newton’s Third Law
Ideal string
A string with negligible mass that doesn't stretch. Its tension is the same all along it, even when it passes over an ideal pulley.
Topic 2.3: Newton’s Third Law
Ideal pulley
A massless, frictionless pulley. It changes the direction of a string's tension without changing its size.
Topic 2.3: Newton’s Third Law
Newton's first law
If the net force on a system is zero, its velocity stays constant: at rest stays at rest, moving keeps moving in a straight line at constant speed.
Topic 2.4: Newton’s First Law
Inertia
An object's tendency to resist changes in its velocity. Mass is the measure of inertia.
Topic 2.4: Newton’s First Law
Net force
The vector sum of all the forces on a system. It, not any single force, sets the acceleration.
Topic 2.4: Newton’s First Law
Translational equilibrium
The state where the net force on a system is zero, so its acceleration is zero. It can be at rest or moving at constant velocity.
Topic 2.4: Newton’s First Law
Newton's second law
: acceleration points along the net force, gets bigger with more force and smaller with more mass.
Topic 2.5: Newton’s Second Law
Inclined plane
Tilt your axes so x runs along the ramp. On a frictionless ramp at angle θ, gravity's part along the slope gives a = g sin θ.
Topic 2.5: Newton’s Second Law
Connected objects as one system
Objects tied or pushed together share one acceleration. Treat them as one system so internal forces cancel: a = (net external force) ÷ (total mass).
Topic 2.5: Newton’s Second Law
Newton's law of universal gravitation
Any two masses attract: , with r measured between centers. Doubling r cuts the force to one-fourth.
Topic 2.6: Gravitational Force
Gravitational constant (G)
G = 6.67 × 10⁻¹¹ N·m²/kg², the tiny number in . It's why gravity between everyday objects is too small to notice.
Topic 2.6: Gravitational Force
Gravitational field strength (g)
Gravitational force per kilogram, . At Earth's surface it's about 9.8 N/kg, which equals 9.8 m/s².
Topic 2.6: Gravitational Force
Weight
The gravitational force on an object, . Your mass is the same everywhere, but your weight depends on where you are.
Topic 2.6: Gravitational Force
Apparent weight
The normal force from what supports you, like a scale's reading. It's more than mg when you accelerate upward and less when you accelerate downward.
Topic 2.6: Gravitational Force
Apparent weightlessness
Feeling weightless when you and your surroundings fall together, as in orbit. Gravity still acts; the normal force is just zero.
Topic 2.6: Gravitational Force
Inertial and gravitational mass
The mass that resists acceleration and the mass that feels gravity are equal. That's why all objects in free fall have the same acceleration.
Topic 2.6: Gravitational Force
Kinetic friction
Friction on surfaces sliding past each other: , opposite the sliding. It doesn't depend on speed or contact area.
Topic 2.7: Kinetic and Static Friction
Static friction
Friction that keeps surfaces from sliding. It's only as big as needed, up to , and points whichever way prevents slipping.
Topic 2.7: Kinetic and Static Friction
Coefficient of friction (μ)
A number with no units that describes how grippy two surfaces are. For the same pair of surfaces, is usually larger than .
Topic 2.7: Kinetic and Static Friction
Hooke's law
An ideal spring's force is proportional to its stretch or compression: F = kΔx, pointing back toward the spring's relaxed length.
Topic 2.8: Spring Forces
Spring constant (k)
How stiff a spring is, in N/m: the force needed per meter of stretch. It's the slope of a force-versus-stretch graph.
Topic 2.8: Spring Forces
Restoring force
A force that always points back toward equilibrium, like a spring's force. It gets bigger the farther you pull the object away.
Topic 2.8: Spring Forces
Centripetal acceleration
The acceleration of an object moving in a circle, pointing toward the center: . It's there even at constant speed, because direction changes.
Topic 2.9: Circular Motion
Centripetal force
Not a new kind of force: it's the net inward force, provided by tension, gravity, friction, the normal force or a mix, that keeps an object on a circle.
Topic 2.9: Circular Motion
Tangential acceleration
The part of acceleration along the direction of motion. It changes an object's speed, while centripetal acceleration changes its direction.
Topic 2.9: Circular Motion
Period (T) and frequency (f)
The period is the time for one full circle; frequency is circles per second (Hz). , and speed .
Topic 2.9: Circular Motion
Kepler's third law
For circular orbits around a central mass M: . Farther orbits take longer, and the T² versus r³ slope gives M.
Topic 2.9: Circular Motion