Skip to main content

Unit 8 · Topic 8.8

8.8 Volumes with Cross Sections: Triangles and Semicircles

This is the same slicing idea as 8.7 with different shapes: semicircles, equilateral triangles and right triangles. Find the side length from the base region, plug it into the shape's area formula, and integrate.

Key terms

  • semicircle
  • equilateral triangle
  • isosceles right triangle
  • area formula
  • cross section

Area formulas in terms of the side s in the base

In every case, s is the length of the slice's edge that lies in the base: top − bottom (or right − left).

Cross sections is the…Area
squaresides²
semicirclediameterπ8s2\frac{\pi}{8}s^2
equilateral triangleside34s2\frac{\sqrt{3}}{4}s^2
isosceles right trianglelegs22\frac{s^2}{2}
isosceles right trianglehypotenuses24\frac{s^2}{4}
rectangle with height h·sbaseh·s²

Where those formulas come from

  • Semicircle: the radius is s2\frac{s}{2}, so the area is 12π(s2)2=πs28\frac{1}{2}\pi\left(\frac{s}{2}\right)^2 = \frac{\pi s^2}{8}. The most common error is using s as the radius.
  • Equilateral triangle: the height is 32s\frac{\sqrt{3}}{2}s, so the area is 12⋅s⋅32s=34s2\frac{1}{2} \cdot s \cdot \frac{\sqrt{3}}{2}s = \frac{\sqrt{3}}{4}s^2.
  • Isosceles right triangle with a leg in the base: both legs are s, so the area is 12s2\frac{1}{2}s^2.
  • Isosceles right triangle with the hypotenuse in the base: each leg is s2\frac{s}{\sqrt{2}}, so the area is 12(s2)2=s24\frac{1}{2}\left(\frac{s}{\sqrt{2}}\right)^2 = \frac{s^2}{4}.

Steps (same as 8.7)

  • Sketch the base and one slice.
  • Find s in terms of x (or y).
  • Write A in terms of s using the table.
  • Integrate A over the base's extent.

Common base widths

  • Region between y = f(x) and the x-axis: s = f(x).
  • Region between two curves: s = top − bottom.
  • Disk x² + y² ≤ r², sliced perpendicular to the x-axis: s=2r2−x2s = 2\sqrt{r^2 - x^2}.
  • Region between a curve and the y-axis, sliced perpendicular to the y-axis: s = x expressed in terms of y.

A check you can trust

Here's a case where you know the answer from geometry. Let the base be the disk x² + y² ≤ r², with semicircle cross sections perpendicular to the x-axis. Each slice has diameter s=2r2−x2s = 2\sqrt{r^2 - x^2}, so the volume is π8∫−rr4(r2−x2) dx=π2(4r33)=23πr3\frac{\pi}{8}\int_{-r}^{r} 4(r^2 - x^2)\,dx = \frac{\pi}{2}\left(\frac{4r^3}{3}\right) = \frac{2}{3}\pi r^3. That's exactly the volume of a hemisphere, which is what those stacked half-discs form. Checks like this build trust in the formulas.

Read the wording carefully

“Semicircles whose diameters lie in the base” means s is the diameter. “Isosceles right triangles with one leg in the base” means s is a leg. “With the hypotenuse in the base” means s is the hypotenuse. These change the constant in front of s², and therefore the final answer, so read them closely. Pull the constant out of the integral and integrate s² once.

Worked examples

Try each one yourself first, then open the solution.

  1. Example 1

    Semicircle cross sections

    The base of a solid is the region bounded by y = √x, y = 0 and x = 4. Cross sections perpendicular to the x-axis are semicircles with diameters in the base. Find the volume.

    Show the solution
    1. Step 1: Diameter s = √x.
    2. Step 2: Area=π8s2=π8x\text{Area} = \frac{\pi}{8}s^2 = \frac{\pi}{8}x.
    3. Step 3: Volume=π8∫04x dx=π8(8)=π\text{Volume} = \frac{\pi}{8}\int_0^4 x\,dx = \frac{\pi}{8}(8) = \pi.

    Answer: π cubic units

  2. Example 2

    Equilateral triangle cross sections

    The base of a solid is the region between y = x and y = x² for 0 ≤ x ≤ 1. Cross sections perpendicular to the x-axis are equilateral triangles. Find the volume.

    Show the solution
    1. Step 1: On (0, 1), x > x², so s = x − x².
    2. Step 2: Area=34(x−x2)2\text{Area} = \frac{\sqrt{3}}{4}(x - x^2)^2.
    3. Step 3: Expand: (x − x²)² = x² − 2x³ + x⁴. ∫01(x2−2x3+x4) dx=13−12+15=130\int_0^1 (x^2 - 2x^3 + x^4)\,dx = \frac{1}{3} - \frac{1}{2} + \frac{1}{5} = \frac{1}{30}.
    4. Step 4: Volume=34⋅130=3120≈0.0144\text{Volume} = \frac{\sqrt{3}}{4} \cdot \frac{1}{30} = \frac{\sqrt{3}}{120} \approx 0.0144.

    Answer: 3120\frac{\sqrt{3}}{120} cubic units

  3. Example 3

    Trap: hypotenuse in the base

    The base of a solid is the disk x² + y² ≤ 9. Cross sections perpendicular to the x-axis are isosceles right triangles with the hypotenuse in the base. Find the volume.

    Show the solution
    1. Step 1: At x, the disk runs from y=−9−x2y = -\sqrt{9 - x^2} to y=9−x2y = \sqrt{9 - x^2}, so s=29−x2s = 2\sqrt{9 - x^2}.
    2. Step 2: The hypotenuse is s, so the area is s24=4(9−x2)4=9−x2\frac{s^2}{4} = \frac{4(9 - x^2)}{4} = 9 - x^2.
    3. Step 3: Volume=∫−33(9−x2) dx=2(27−9)=36\text{Volume} = \int_{-3}^{3} (9 - x^2)\,dx = 2(27 - 9) = 36.
    4. Step 4: If you used the leg formula s22\frac{s^2}{2} by mistake, you'd get 72.

    Answer: 36 cubic units

Common mistakes

  • Using the diameter as the radius for semicircles: πs22\frac{\pi s^2}{2} instead of πs28\frac{\pi s^2}{8}.
  • Using the leg formula when the hypotenuse is in the base, or the reverse.
  • Forgetting that a full circle region has width 2r2−x22\sqrt{r^2 - x^2}, not r2−x2\sqrt{r^2 - x^2}.
  • Mixing up the order: compute s, then square it, then multiply by the constant.

On the exam

  • Expect these as the last part of a region question. You're often asked to write the integral without evaluating it, so the constant and s² must be exactly right.
  • If allowed a calculator, still write the integral first, like π8∫04(f(x)−g(x))2 dx\frac{\pi}{8}\int_0^4 \left(f(x) - g(x)\right)^2\,dx.

Connected topics

Videos

  • Calculus AB/BC – 8.8 Volumes with Cross Sections: Triangles and Semicircles

    The AlgebrosWatch on YouTube (opens in a new tab)

  • Volume with cross sections: semicircle | AP Calculus AB | Khan Academy

    Khan AcademyWatch on YouTube (opens in a new tab)

  • AP Calculus AB TOPIC 8.8 Volumes with Cross Sections: Triangles and Semicircles

    Math Teacher GOATWatch on YouTube (opens in a new tab)

  • Volume of a Solid with Circular Base & Equilateral Triangle Cross Sections

    Calculus by ChristeeWatch on YouTube (opens in a new tab)

  • Volume with cross sections: triangle | AP Calculus AB | Khan Academy

    Khan AcademyWatch on YouTube (opens in a new tab)

Check yourself: 8.8 Volumes with Cross Sections: Triangles and Semicircles

4 questions on 8.8 Volumes with Cross Sections: Triangles and Semicircles. Pick an answer to see if you got it, and why.

Question 1 of 4

The base of a solid is the region bounded by the graph of y = 4 − x² and the x-axis. Each cross section of the solid perpendicular to the x-axis is a semicircle whose diameter lies in the base. What is the volume of the solid?

Question 2 of 4

The base of a solid is the triangular region bounded by the line y = 2 − x and the coordinate axes. Each cross section of the solid perpendicular to the x-axis is an equilateral triangle. What is the volume of the solid?

Question 3 of 4

The base of a solid is the region bounded by the graphs of y = x and y = x². Each cross section of the solid perpendicular to the x-axis is a semicircle whose diameter lies in the base. What is the volume of the solid?

Question 4 of 4

The base of a solid is the disk bounded by the circle x² + y² = 4. Each cross section of the solid perpendicular to the x-axis is an isosceles right triangle with one leg in the base. What is the volume of the solid?

0 of 4 answered

Something wrong or out of date here?

Something wrong with this page?

What's wrong?

Please don't include personal details.