AP® Calculus AB Unit 8 flashcardsApplications of Integration
33 cards · about 8 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 33
- Due
- 33
- Mastered
- 0 / 33
This card: New
Flip the card before you rate it.
Average value of a function
The average value of f on [a, b] is : the integral divided by the length of the interval.
Topic 8.1: Finding the Average Value of a Function on an Interval
Average value as a rectangle
The average value is the height of a rectangle over [a, b] with the same area as the region under f. Height × (b − a) = the integral.
Topic 8.1: Finding the Average Value of a Function on an Interval
Mean Value Theorem for integrals
If f is continuous on [a, b], then f(c) equals its average value for at least one c in [a, b]. Continuity is the condition you must check.
Topic 8.1: Finding the Average Value of a Function on an Interval
Average value vs. average rate of change
Average value of f is . Average rate of change is . They answer different questions, so read carefully.
Topic 8.1: Finding the Average Value of a Function on an Interval
Displacement from velocity
is the change in position. Forward and backward motion cancel, so it can be negative or zero.
Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals
Total distance traveled
, the integral of speed. Split the interval where v changes sign and add the sizes of the pieces.
Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals
Position from velocity
. Start with the known position and add the displacement.
Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals
Velocity from acceleration
. The integral of acceleration is the change in velocity.
Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals
Net change from a rate
If r(t) is the rate something changes, is the total change in that amount from t = a to t = b.
Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts
Amount at a later time
. Don't forget the starting amount.
Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts
Units of a definite integral
Multiply the units of the rate by the units of the variable: (gallons per hour) × hours = gallons.
Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts
Greatest amount (rate in vs. rate out)
To find when an amount is greatest, check the endpoints and the times when rate in = rate out, then compare the amounts there.
Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts
Area between curves (vertical slices)
. The limits are x-values, often where the curves cross.
Topic 8.4: Finding the Area Between Curves Expressed as Functions of x
Finding the limits for area
Set the two curves equal and solve. The x-values (or y-values) where they meet are usually the limits of integration.
Topic 8.4: Finding the Area Between Curves Expressed as Functions of x
Area between curves (horizontal slices)
. Write each curve as x in terms of y, and use y-values as the limits.
Topic 8.5: Finding the Area Between Curves Expressed as Functions of y
When to slice horizontally
Use dy when the region is easier to describe from left to right, or when slicing vertically would need more than one integral.
Topic 8.5: Finding the Area Between Curves Expressed as Functions of y
Area when curves cross more than twice
Split the integral at every crossing so you always subtract bottom from top, then add the pieces.
Topic 8.6: Finding the Area Between Curves That Intersect at More Than Two Points
Area with an absolute value
Area between f and g on [a, b] is . It's the quickest route on a calculator when the curves switch places.
Topic 8.6: Finding the Area Between Curves That Intersect at More Than Two Points
Volume by cross sections
, where A(x) is the area of a slice perpendicular to the x-axis. Find the slice's side length from the base region first.
Topic 8.7: Volumes with Cross Sections: Squares and Rectangles
Square cross sections
If each slice is a square with side s, its area is s². For a base between curves, s = top − bottom, and .
Topic 8.7: Volumes with Cross Sections: Squares and Rectangles
Rectangle cross sections
Area of a slice = base × height. The base comes from the region; the height is given, such as "height equal to twice the base."
Topic 8.7: Volumes with Cross Sections: Squares and Rectangles
Semicircle cross section area
A semicircle with diameter s has area . The radius is , and you take half of .
Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles
Equilateral triangle cross section area
An equilateral triangle with side s has area .
Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles
Isosceles right triangle cross sections
With a leg in the base, area = . With the hypotenuse in the base, area = .
Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles
Solid of revolution
The solid you get by spinning a flat region around a line, called the axis of rotation.
Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis
Disc method
When the region touches the axis, each slice is a disc of area πr². (or dy), with r the distance from the axis to the curve.
Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis
Disc method about the y-axis
Slice perpendicular to the y-axis and write x in terms of y. .
Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis
Radius about a horizontal line
For the axis y = k, a curve y = f(x) is away. If the axis is above the curve, the radius is k − f(x); if it's below, f(x) − k.
Topic 8.10: Volume with Disc Method: Revolving Around Other Axes
Radius about a vertical line
For the axis x = h, slice horizontally. A curve x = g(y) is away, and you integrate with dy.
Topic 8.10: Volume with Disc Method: Revolving Around Other Axes
Washer method
When the region doesn't touch the axis, each slice is a washer. , with R the outer radius and r the inner radius.
Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis
Outer and inner radius
The outer radius R reaches the curve farther from the axis; the inner radius r reaches the curve closer to it.
Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis
Washer mistake to avoid
Subtract the squares, not the radii: , never .
Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis
Washers about another line
Measure both radii from the axis. For y = −2 below the region, a curve y = f(x) gives radius f(x) + 2.
Topic 8.12: Volume with Washer Method: Revolving Around Other Axes