AP® Precalculus Unit 4 flashcardsFunctions Involving Parameters, Vectors, and Matrices
37 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 37
- Due
- 37
- Mastered
- 0 / 37
This card: New
Flip the card before you rate it.
Parametric function
Gives x and y separately in terms of a third variable t, the parameter: (x(t), y(t)). Plot the points in order of increasing t.
Topic 4.1: Parametric Functions
Orientation
The direction a parametric curve is traced as t increases. Arrows on the graph usually show it.
Topic 4.1: Parametric Functions
Planar motion
(x(t), y(t)) can give a particle's position in the plane at time t.
Topic 4.2: Parametric Functions Modeling Planar Motion
Horizontal and vertical extremes
The particle's farthest left/right points come from the min/max of x(t). Its lowest/highest points come from the min/max of y(t).
Topic 4.2: Parametric Functions Modeling Planar Motion
Intercepts of a parametric curve
Zeros of x(t) give points on the y-axis. Zeros of y(t) give points on the x-axis.
Topic 4.2: Parametric Functions Modeling Planar Motion
Direction of motion
x(t) increasing means moving right; decreasing means left. y(t) increasing means moving up; decreasing means down.
Topic 4.3: Parametric Functions and Rates of Change
Slope between two parametric points
between t₁ and t₂: the ratio of y's average rate of change to x's. Needs a nonzero change in x.
Topic 4.3: Parametric Functions and Rates of Change
Unit circle parametrization
x = cos t, y = sin t for 0 ≤ t ≤ 2π traces the unit circle once, counterclockwise, starting at (1, 0).
Topic 4.4: Parametrically Defined Circles and Lines
Circle of radius r centered at (h, k)
x = h + r cos t, y = k + r sin t traces it counterclockwise. Swapping or negating parts changes the start or direction.
Topic 4.4: Parametrically Defined Circles and Lines
Line segment parametrization
From (x₁, y₁) to (x₂, y₂): x = x₁ + (x₂ − x₁)t, y = y₁ + (y₂ − y₁)t for 0 ≤ t ≤ 1.
Topic 4.4: Parametrically Defined Circles and Lines
Implicitly defined function
An equation in x and y, like x² + y² = 25, that describes a curve without giving y as one formula. Solving for y can split it into functions.
Topic 4.5: Implicitly Defined Functions
Horizontal and vertical spots on an implicit curve
Where y's rate of change with respect to x is 0, the curve is flat; where x's rate with respect to y is 0, the curve is vertical.
Topic 4.5: Implicitly Defined Functions
Parabola (conic form)
y − k = a(x − h)² opens up or down; x − h = a(y − k)² opens right or left. The vertex is (h, k).
Topic 4.6: Conic Sections
Ellipse
: center (h, k), horizontal radius a, vertical radius b. A circle is the case a = b.
Topic 4.6: Conic Sections
Hyperbola
opens left and right; with the y-term first, it opens up and down. Asymptotes: .
Topic 4.6: Conic Sections
Parametrizing y = f(x)
Use x = t and y = f(t). If f is invertible, x = f(t), y = t traces its inverse.
Topic 4.7: Parametrization of Implicitly Defined Functions
Ellipse parametrization
x = h + a cos t, y = k + b sin t for 0 ≤ t ≤ 2π. It works because cos²t + sin²t = 1.
Topic 4.7: Parametrization of Implicitly Defined Functions
Hyperbola parametrization
Left-right: x = h + a sec t, y = k + b tan t. Up-down: x = h + a tan t, y = k + b sec t. It works because sec²t − tan²t = 1.
Topic 4.7: Parametrization of Implicitly Defined Functions
Vector
A directed line segment with a magnitude (length) and a direction. From P₁ to P₂ it's ⟨x₂ − x₁, y₂ − y₁⟩.
Topic 4.8: Vectors
Magnitude of a vector
. It's the vector's length.
Topic 4.8: Vectors
Unit vector
A vector of length 1. To get one in the direction of v, divide v by |v|. i = ⟨1, 0⟩ and j = ⟨0, 1⟩.
Topic 4.8: Vectors
Dot product
⟨a₁, b₁⟩ · ⟨a₂, b₂⟩ = a₁a₂ + b₁b₂. It also equals , so a dot product of 0 means perpendicular.
Topic 4.8: Vectors
Vector-valued function
p(t) = ⟨x(t), y(t)⟩ gives a position vector at each time t. Its magnitude is the distance from the origin.
Topic 4.9: Vector-Valued Functions
Velocity vector
Its x-component's sign says left or right, its y-component's sign says up or down, and its magnitude is the speed.
Topic 4.9: Vector-Valued Functions
Matrix dimensions
An n × m matrix has n rows and m columns. You can multiply A·B only if A's columns match B's rows.
Topic 4.10: Matrices
Matrix multiplication
Each entry of AB is a row of A dotted with a column of B. Usually AB ≠ BA.
Topic 4.10: Matrices
Determinant of a 2 × 2
For , . Its absolute value is the area of the parallelogram formed by the columns.
Topic 4.11: The Inverse and Determinant of a Matrix
Identity matrix
: 1s on the main diagonal and 0s elsewhere. Multiplying by it leaves a matrix unchanged.
Topic 4.11: The Inverse and Determinant of a Matrix
Inverse of a 2 × 2
. It exists only when the determinant isn't 0.
Topic 4.11: The Inverse and Determinant of a Matrix
Linear transformation
A function that sends each vector to a vector whose components are sums of constant multiples of the inputs. It always sends ⟨0, 0⟩ to ⟨0, 0⟩.
Topic 4.12: Linear Transformations and Matrices
Transformation matrix
Every linear transformation of the plane is L(v) = Av for a 2 × 2 matrix A. Its columns are where ⟨1, 0⟩ and ⟨0, 1⟩ land.
Topic 4.12: Linear Transformations and Matrices
Rotation matrix
rotates every vector θ radians counterclockwise about the origin.
Topic 4.13: Matrices as Functions
Composing transformations
Doing one transformation and then another matches multiplying their matrices, with the first one on the right.
Topic 4.13: Matrices as Functions
Inverse transformation
If L(v) = Av, then L⁻¹(v) = A⁻¹v undoes it. The absolute value of det A tells how much L scales areas.
Topic 4.13: Matrices as Functions
Transition matrix
A matrix of rates for moving between states in one step. Multiplying it by the current state vector predicts the next state.
Topic 4.14: Matrices Modeling Contexts
Steady state
A state vector that stays the same after one more step: Ts = s. Repeated multiplication often approaches it.
Topic 4.14: Matrices Modeling Contexts
Past states
Multiplying the current state vector by the inverse of the transition matrix estimates the state one step earlier.
Topic 4.14: Matrices Modeling Contexts