Skip to main content

AP® Precalculus Unit 1 flashcardsPolynomial and Rational Functions

38 cards · about 10 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 38
Due
38
Mastered
0 / 38
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Function

    A rule that pairs each input with exactly one output. You can show it as a graph, a table, an equation or in words.

    Topic 1.1: Change in Tandem

  • Equal functions

    f and g are equal when they have the same domain and f(a) = g(a) for every input a in it. The same formula with a different domain is not equal.

    Topic 1.1: Change in Tandem

  • Increasing / decreasing

    A function is increasing on an interval if outputs go up as inputs go up, and decreasing if outputs go down as inputs go up.

    Topic 1.1: Change in Tandem

  • Concave up

    The graph bends upward like a cup. It happens on intervals where the rate of change is increasing.

    Topic 1.1: Change in Tandem

  • Concave down

    The graph bends downward like a frown. It happens on intervals where the rate of change is decreasing.

    Topic 1.1: Change in Tandem

  • Zero of a function

    An input value where the output is 0. On a graph, it's where the graph meets the x-axis.

    Topic 1.1: Change in Tandem

  • Average rate of change

    f(b)−f(a)b−a\dfrac{f(b) - f(a)}{b - a}: the change in output divided by the change in input over [a, b]. It's the slope of the secant line.

    Topic 1.2: Rates of Change

  • Rate of change at a point

    How fast the output is changing right at one input. Estimate it with average rates of change over tiny intervals around that point.

    Topic 1.2: Rates of Change

  • Positive vs. negative rate of change

    A positive rate means both quantities move the same way. A negative rate means one goes up while the other goes down.

    Topic 1.2: Rates of Change

  • Secant line

    The line through two points on a graph, (a, f(a)) and (b, f(b)). Its slope is the average rate of change on [a, b].

    Topic 1.3: Rates of Change in Linear and Quadratic Functions

  • Linear function: rate pattern

    Average rates of change over equal-length intervals are all the same. So the rate of change changes at a rate of zero.

    Topic 1.3: Rates of Change in Linear and Quadratic Functions

  • Quadratic function: rate pattern

    Average rates of change over consecutive equal-length intervals change by the same amount each time (constant second differences).

    Topic 1.3: Rates of Change in Linear and Quadratic Functions

  • Polynomial function

    A function like aₙxⁿ + … + a₁x + a₀ with whole-number powers and aₙ ≠ 0. The degree is n and aₙxⁿ is the leading term. A nonzero constant is degree 0.

    Topic 1.4: Polynomial Functions and Rates of Change

  • Relative (local) extremum

    A local max or min: where f switches between increasing and decreasing, or at an included endpoint of a restricted domain. Between two distinct real zeros of a polynomial there's always one.

    Topic 1.4: Polynomial Functions and Rates of Change

  • Absolute (global) extremum

    The greatest or least output value of the whole function. An even-degree polynomial always has a global max or a global min.

    Topic 1.4: Polynomial Functions and Rates of Change

  • Point of inflection

    A point where the graph changes concavity, which is where the rate of change switches between increasing and decreasing.

    Topic 1.4: Polynomial Functions and Rates of Change

  • Multiplicity

    How many times a linear factor repeats. At an odd-multiplicity zero the graph crosses the x-axis; at an even one it touches and turns back.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • Complex conjugate zeros

    If a polynomial has real coefficients and a + bi is a zero, then a − bi is a zero too.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • Number of complex zeros

    A degree-n polynomial has exactly n complex zeros, counting multiplicity. Some may be non-real.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • Even function

    f(−x) = f(x) for every x. Its graph is a mirror image across the y-axis, like x² or x⁴.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • Odd function

    f(−x) = −f(x) for every x. Its graph is symmetric about the origin, like x³ or x⁵.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • Finite differences and degree

    For equally spaced inputs, a polynomial's degree is the first level n where the nth differences of the outputs are constant.

    Topic 1.5: Polynomial Functions and Complex Zeros

  • End behavior of a polynomial

    What the outputs do as x → ∞ and x → −∞. It's set by the leading term's degree (even or odd) and the sign of its coefficient.

    Topic 1.6: Polynomial Functions and End Behavior

  • Rational function

    A quotient of two polynomials, p(x)q(x)\frac{p(x)}{q(x)}. It's undefined wherever q(x) = 0.

    Topic 1.7: Rational Functions and End Behavior

  • Horizontal asymptote

    Same degree on top and bottom: y = ratio of leading coefficients. Bottom degree bigger: y = 0. Top bigger: no horizontal asymptote.

    Topic 1.7: Rational Functions and End Behavior

  • Slant asymptote

    When the numerator's degree is exactly one more than the denominator's, the graph approaches a line y = mx + b. Find it with long division.

    Topic 1.7: Rational Functions and End Behavior

  • Zeros of a rational function

    The real zeros of the numerator that are in the domain. If the denominator is also 0 there, it's not a zero.

    Topic 1.8: Rational Functions and Zeros

  • Vertical asymptote

    At x = a when the denominator's zero at a isn't fully canceled by the numerator. Outputs head to ∞ or −∞ as x → a.

    Topic 1.9: Rational Functions and Vertical Asymptotes

  • Hole

    A missing point at x = c when (x − c) cancels: its multiplicity on top is at least its multiplicity on the bottom. Its height is lim⁡x→cr(x)\lim_{x \to c} r(x).

    Topic 1.10: Rational Functions and Holes

  • Polynomial long division

    Rewrites f as g·q + r, where the remainder r has a smaller degree than g. Useful for slant asymptotes.

    Topic 1.11: Equivalent Representations of Polynomial and Rational Expressions

  • Binomial theorem

    Expands (a + b)ⁿ using row n of Pascal's triangle as coefficients. For example, (a + b)³ = a³ + 3a²b + 3ab² + b³.

    Topic 1.11: Equivalent Representations of Polynomial and Rational Expressions

  • Vertical translation and dilation

    f(x) + k shifts the graph up k. a·f(x) stretches it vertically by a factor of |a|, and a negative a also reflects it over the x-axis.

    Topic 1.12: Transformations of Functions

  • Horizontal translation and dilation

    f(x + h) shifts the graph left h (right if h < 0). f(bx) dilates it horizontally by a factor of 1∣b∣\frac{1}{\lvert b\rvert}; a negative b reflects it over the y-axis.

    Topic 1.12: Transformations of Functions

  • Choosing a model type

    Roughly constant rate → linear. Rate changing at a steady pace or one symmetric max/min → quadratic. Volume contexts → often cubic.

    Topic 1.13: Function Model Selection and Assumption Articulation

  • Piecewise-defined function

    A function made of different rules on separate input intervals. Useful when a situation behaves differently in different ranges.

    Topic 1.13: Function Model Selection and Assumption Articulation

  • Model assumptions and restrictions

    Every model assumes something about how quantities change, and may need a domain or range limit that fits the context.

    Topic 1.13: Function Model Selection and Assumption Articulation

  • Inverse proportion model

    y=kxy = \frac{k}{x}, or y=kx2y = \frac{k}{x^2} for an inverse square law. When x goes up, y goes down. These are rational function models.

    Topic 1.14: Function Model Construction and Application

  • Regression

    Using a calculator to find the function of a chosen type (linear, quadratic, cubic, quartic, …) that best fits a data set.

    Topic 1.14: Function Model Construction and Application