AP® Physics 1: Algebra-Based Unit 8 flashcardsFluids
30 cards · about 8 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 30
- Due
- 30
- Mastered
- 0 / 30
This card: New
Flip the card before you rate it.
Fluid
A substance with no fixed shape that flows to take the shape of its container. Liquids and gases are both fluids.
Topic 8.1: Internal Structure and Density
Solid, liquid and gas
The phases differ because of how strongly their particles interact. Solid particles are locked in place, liquid ones touch but slide, and gas ones are far apart.
Topic 8.1: Internal Structure and Density
Density (ρ = m/V)
Mass per unit volume, in kg/m³. It's a property of the material: cutting an object in half doesn't change its density.
Topic 8.1: Internal Structure and Density
Density of water
About 1000 kg/m³, which is 1.0 g/cm³. Objects denser than water sink in it, and less dense ones float.
Topic 8.1: Internal Structure and Density
Ideal fluid
A model fluid that is incompressible and has no viscosity. AP Physics 1 assumes fluids are ideal and pipes are full, unless told otherwise.
Topic 8.1: Internal Structure and Density
Incompressible
Its volume and density don't change, however much pressure you apply. Liquids are nearly incompressible; gases are not.
Topic 8.1: Internal Structure and Density
Viscosity
A fluid's internal friction, its resistance to flowing. Honey has high viscosity. An ideal fluid has none, so it flows without losing energy.
Topic 8.1: Internal Structure and Density
Pressure (P = F/A)
The perpendicular force per unit area on a surface. Spreading the same force over a bigger area lowers the pressure.
Topic 8.2: Pressure
Pascal (Pa)
The SI unit of pressure: 1 Pa = 1 N/m². Atmospheric pressure is about 1.0 × 10⁵ Pa.
Topic 8.2: Pressure
Pressure is a scalar
Pressure has no direction. At a point in a fluid it pushes on any surface, and the force always acts perpendicular to that surface.
Topic 8.2: Pressure
Particle view of pressure
A fluid's pressure is the combined push of huge numbers of its particles hitting a surface, added up and divided by the area.
Topic 8.2: Pressure
Atmospheric pressure ()
The pressure from the air around us, about 1.0 × 10⁵ Pa at sea level. It's often the reference pressure P₀ at an open surface.
Topic 8.2: Pressure
Gauge pressure (ρgh)
The extra pressure from a column of fluid of depth h above a point. It grows in proportion to the depth and to the fluid's density.
Topic 8.2: Pressure
Absolute pressure (P = P₀ + ρgh)
The total pressure at a point: the reference pressure at the surface plus the gauge pressure from the fluid above it.
Topic 8.2: Pressure
Pressure depends only on depth
In a fluid at rest, all points at the same depth have the same pressure, whatever the container's shape or the amount of fluid.
Topic 8.2: Pressure
Pressure–depth graph
A straight line. Its intercept is the surface pressure P₀, and its slope is ρg, so you can find a fluid's density from the slope.
Topic 8.2: Pressure
Buoyant force ()
The net upward force a fluid exerts on an object in it. It exists because the fluid pushes harder on the deeper, bottom part of the object.
Topic 8.3: Fluids and Newton’s Laws
Archimedes' principle ()
The buoyant force equals the weight of the fluid the object displaces. ρ is the fluid's density and V is the submerged volume.
Topic 8.3: Fluids and Newton’s Laws
Displaced fluid
The fluid pushed aside by the submerged part of an object. Its volume equals the submerged volume of the object.
Topic 8.3: Fluids and Newton’s Laws
Floating
A floating object is in equilibrium, so the buoyant force equals its weight. The fraction under water is .
Topic 8.3: Fluids and Newton’s Laws
Sinking
An object sinks when its weight is greater than the largest buoyant force the fluid can give it, which happens when it is denser than the fluid.
Topic 8.3: Fluids and Newton’s Laws
Apparent weight in a fluid
The reading on a scale holding a submerged object: its true weight minus the buoyant force. The difference tells you its volume.
Topic 8.3: Fluids and Newton’s Laws
Free-body diagram in a fluid
Draw the weight down, the buoyant force up, and any string tension or normal force. If the object is at rest, they add to zero.
Topic 8.3: Fluids and Newton’s Laws
Newton's laws for fluids
A bit of fluid speeds up, slows down or turns only if the forces on it are unbalanced, usually because the pressure differs on its two sides.
Topic 8.3: Fluids and Newton’s Laws
Volume flow rate (Av)
The volume of fluid passing a point each second, in m³/s. The volume that passes in time t is V = Avt.
Topic 8.4: Fluids and Conservation Laws
Continuity equation (A₁v₁ = A₂v₂)
For an incompressible fluid in a full pipe, what flows in each second must flow out. Where the pipe narrows, the fluid speeds up.
Topic 8.4: Fluids and Conservation Laws
Pressure difference and flow
A difference in pressure makes a fluid start moving or speed up. The fluid is pushed from higher pressure toward lower pressure.
Topic 8.4: Fluids and Conservation Laws
Bernoulli's equation
P₁ + ρgy₁ + ½ρv₁² = P₂ + ρgy₂ + ½ρv₂². It's conservation of energy per unit volume for an ideal fluid flowing along a pipe.
Topic 8.4: Fluids and Conservation Laws
Faster flow, lower pressure
In a horizontal pipe, where the fluid moves faster its pressure is lower. That's Bernoulli's equation with the height terms canceling.
Topic 8.4: Fluids and Conservation Laws
Torricelli's theorem ()
The speed of fluid leaving a hole a depth h below the surface of a large open tank. It's the same speed as falling from height h.
Topic 8.4: Fluids and Conservation Laws