Skip to main content

AP® Physics C: Mechanics Unit 3 flashcardsWork, Energy, and Power

30 cards · about 8 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 30
Due
30
Mastered
0 / 30
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Translational kinetic energy

    Energy of motion, K=12mv2K = \frac{1}{2}mv^2. It's a scalar that's never negative, and doubling the speed makes it four times larger.

    Topic 3.1: Translational Kinetic Energy

  • Joule

    The SI unit of energy and work: 1 J = 1 N·m = 1 kg·m²/s².

    Topic 3.1: Translational Kinetic Energy

  • Kinetic energy and reference frames

    Speed depends on the frame, so observers in different frames can measure different kinetic energies for the same object.

    Topic 3.1: Translational Kinetic Energy

  • Work

    Energy transferred by a force over a displacement: W=∫F⃗⋅dr⃗W = \int\vec{F}\cdot d\vec{r}. Only the force component along the motion does work.

    Topic 3.2: Work

  • Work by a constant force

    W=Fdcos⁡θW = Fd\cos\theta, where θ is the angle between the force and the displacement. Work is negative when θ is more than 90°.

    Topic 3.2: Work

  • Dot product

    A⃗⋅B⃗=AxBx+AyBy+AzBz=ABcos⁡θ\vec{A}\cdot\vec{B} = A_xB_x + A_yB_y + A_zB_z = AB\cos\theta. It's a scalar, and it's zero when the vectors are perpendicular.

    Topic 3.2: Work

  • Area under a force–position graph

    The work done by that force. Area below the position axis counts as negative work.

    Topic 3.2: Work

  • Work–energy theorem

    The net work on an object equals its change in kinetic energy: Wnet=ΔKW_{net} = \Delta K.

    Topic 3.2: Work

  • Conservative force

    A force whose work depends only on the start and end points, not the path, like gravity or a spring force. It has a potential energy.

    Topic 3.2: Work

  • Nonconservative force

    A force whose work depends on the path, like friction or drag. Friction usually turns mechanical energy into thermal energy.

    Topic 3.2: Work

  • Work by a perpendicular force

    Zero. A normal force on a sliding object or the tension on an object moving in a circle does no work.

    Topic 3.2: Work

  • Potential energy

    Energy stored in a system of interacting objects because of their positions. It belongs to the system, not to one object.

    Topic 3.3: Potential Energy

  • Potential energy from force

    ΔU=−∫F⃗⋅dr⃗\Delta U = -\int\vec{F}\cdot d\vec{r} for a conservative force. Going the other way, Fx=−dUdxF_x = -\frac{dU}{dx}.

    Topic 3.3: Potential Energy

  • Force from a potential energy graph

    The force is the negative of the slope of U(x), so a conservative force always points toward lower potential energy.

    Topic 3.3: Potential Energy

  • Stable equilibrium

    A minimum of U(x). Nudge the object and the force pushes it back toward the minimum.

    Topic 3.3: Potential Energy

  • Unstable equilibrium

    A maximum of U(x). Nudge the object and the force pushes it farther away.

    Topic 3.3: Potential Energy

  • Turning point

    A position where U equals the total mechanical energy, so K = 0. The object stops there for an instant and reverses.

    Topic 3.3: Potential Energy

  • Elastic potential energy

    Energy stored in a stretched or compressed spring: Us=12k(Δx)2U_s = \frac{1}{2}k(\Delta x)^2.

    Topic 3.3: Potential Energy

  • Gravitational potential energy near Earth

    ΔUg=mgΔy\Delta U_g = mg\Delta y. Only changes matter, so you can put the zero wherever is convenient.

    Topic 3.3: Potential Energy

  • Gravitational potential energy of two bodies

    UG=−Gm1m2rU_G = -\frac{Gm_1m_2}{r}, with zero at infinite separation. It's negative and gets closer to zero as the bodies move apart.

    Topic 3.3: Potential Energy

  • Mechanical energy

    The sum of a system's kinetic and potential energies, K + U.

    Topic 3.4: Conservation of Energy

  • Conservation of mechanical energy

    If no external work is done and no friction acts inside the system, K + U stays constant, so a loss in U shows up as a gain in K.

    Topic 3.4: Conservation of Energy

  • Energy dissipation

    Friction and drag turn mechanical energy into thermal energy and sound. The total energy is still conserved.

    Topic 3.4: Conservation of Energy

  • Choosing a system for energy

    Include Earth to use gravitational potential energy. Leave Earth out and gravity does external work on the object instead.

    Topic 3.4: Conservation of Energy

  • Escape speed

    The launch speed needed to never come back, found by setting the total energy to zero: vesc=2GMRv_{esc} = \sqrt{\frac{2GM}{R}}.

    Topic 3.4: Conservation of Energy

  • Energy with friction

    Initial K + U = final K + U + thermal energy from friction. The thermal energy from kinetic friction on a sliding object is the friction force times the sliding distance.

    Topic 3.4: Conservation of Energy

  • Power

    The rate of energy transfer. Average power is ΔEΔt\frac{\Delta E}{\Delta t}, and instantaneous power is P=dWdtP = \frac{dW}{dt}.

    Topic 3.5: Power

  • Watt

    The SI unit of power: 1 W = 1 J/s. A kilowatt-hour is an energy, 3.6 × 10⁶ J.

    Topic 3.5: Power

  • Power delivered by a force

    P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F}\cdot\vec{v} = Fv\cos\theta. Only the force component along the velocity delivers power.

    Topic 3.5: Power

  • Energy from a power function

    Integrate power over time: W=∫P dtW = \int P\,dt. It's the area under a power–time graph.

    Topic 3.5: Power