AP® Physics C: Mechanics Unit 2 flashcardsForce and Translational Dynamics
38 cards · about 10 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 38
- Due
- 38
- Mastered
- 0 / 38
This card: New
Flip the card before you rate it.
System
The object or group of objects you choose to study. Forces between parts of the system are internal; forces from outside it are external.
Topic 2.1: Systems and Center of Mass
Center of mass
The mass-weighted average position: . External forces move a system as if all its mass were there.
Topic 2.1: Systems and Center of Mass
Center of mass of a continuous object
. Write dm = λ dx, using the linear mass density λ, and integrate along the object.
Topic 2.1: Systems and Center of Mass
Linear mass density
Mass per unit length, , in kg/m. If λ changes along a rod, the total mass is .
Topic 2.1: Systems and Center of Mass
Symmetry and the center of mass
For a uniform object, the center of mass lies on every line of symmetry. It can sit where there's no material, as in a ring.
Topic 2.1: Systems and Center of Mass
Force
A push or pull from an interaction between two objects. It's a vector measured in newtons (N), and an object can't exert a net force on itself.
Topic 2.2: Forces and Free-Body Diagrams
Free-body diagram
A sketch of one object or system showing each force on it as its own arrow from a dot. Draw whole forces, never their components.
Topic 2.2: Forces and Free-Body Diagrams
Normal force
The push a surface exerts on an object, perpendicular to the surface. On a level surface it's mg only if nothing else pushes or pulls vertically and nothing accelerates vertically.
Topic 2.2: Forces and Free-Body Diagrams
Weight
The gravitational force on an object, mg, pointing down toward Earth's center.
Topic 2.2: Forces and Free-Body Diagrams
Tension
The pull a string, rope or cable exerts, directed along it and away from the object. An ideal string has the same tension everywhere.
Topic 2.3: Newton’s Third Law
Newton's third law
If A pushes on B, B pushes on A with an equal and opposite force. The two forces act on different objects, so they never cancel each other.
Topic 2.3: Newton’s Third Law
Internal force
A force between two parts of the same system. Internal forces cancel in pairs, so they can't change the motion of the system's center of mass.
Topic 2.3: Newton’s Third Law
Ideal pulley
A massless, frictionless pulley. It changes the direction of a string's tension without changing its size.
Topic 2.3: Newton’s Third Law
Newton's first law
If the net force on a system is zero, its velocity stays constant, whether it's at rest or moving.
Topic 2.4: Newton’s First Law
Translational equilibrium
The state where , so the acceleration is zero. The object can still be moving at constant velocity.
Topic 2.4: Newton’s First Law
Inertia
An object's tendency to keep the same velocity. Mass measures inertia; it isn't something that runs out.
Topic 2.4: Newton’s First Law
Newton's second law
. The center of mass accelerates in the direction of the net external force.
Topic 2.5: Newton’s Second Law
Atwood machine
Two masses on a string over a pulley. As a system, , and the tension lies between the two weights.
Topic 2.5: Newton’s Second Law
Universal gravitation
Any two masses attract with , where r is the distance between their centers. Doubling r cuts the force to one-fourth.
Topic 2.6: Gravitational Force
Gravitational field
Gravitational force per unit mass, , in N/kg. Near Earth's surface it's about 9.8 N/kg.
Topic 2.6: Gravitational Force
Apparent weight
The normal force on you, which a scale reads. It's more than mg when you accelerate upward and less when you accelerate downward.
Topic 2.6: Gravitational Force
Gravity inside a uniform sphere
Only the mass closer to the center than you pulls on you, so the field grows in proportion to your distance from the center.
Topic 2.6: Gravitational Force
Kinetic friction
Friction between sliding surfaces, opposite the sliding: . It doesn't depend on speed or contact area.
Topic 2.7: Kinetic and Static Friction
Static friction
Friction between surfaces that aren't sliding. It's as large as needed to prevent slipping, up to .
Topic 2.7: Kinetic and Static Friction
Coefficient of friction
A number that depends on the two materials in contact. The static coefficient is usually larger than the kinetic one.
Topic 2.7: Kinetic and Static Friction
Hooke's law
An ideal spring's force is : proportional to the stretch or compression and always back toward equilibrium.
Topic 2.8: Spring Forces
Spring constant
The stiffness of a spring, k, in N/m. It's the slope of a graph of force versus stretch.
Topic 2.8: Spring Forces
Springs in series
Springs end to end: . The combination is softer than either spring alone.
Topic 2.8: Spring Forces
Springs in parallel
Springs side by side: . The combination is stiffer than either spring alone.
Topic 2.8: Spring Forces
Resistive force
A force like drag that points opposite the velocity and grows with speed. In this course it's often .
Topic 2.9: Resistive Forces
Terminal velocity
The steady speed reached when drag balances the other forces. For a falling object with drag kv, .
Topic 2.9: Resistive Forces
Separation of variables
Solving a differential equation by moving every v to one side and every t to the other, then integrating, as in .
Topic 2.9: Resistive Forces
Velocity with linear drag
Falling from rest: . Coasting with drag only: . Both level off over time.
Topic 2.9: Resistive Forces
Centripetal acceleration
The acceleration toward the center of a circular path, . It's present even when the speed is constant.
Topic 2.10: Circular Motion
Tangential acceleration
The part of the acceleration along the path, which changes the speed. Total acceleration is the vector sum of the tangential and centripetal parts.
Topic 2.10: Circular Motion
Banked curve
A tilted road where the normal force supplies the centripetal force. With no friction, .
Topic 2.10: Circular Motion
Kepler's third law
For a circular orbit, . The period depends on the central mass and the orbit's radius, not the satellite's mass.
Topic 2.10: Circular Motion
Period and frequency
The period T is the time for one full revolution, and the frequency f = 1/T is revolutions per second. For a circle, v = 2πr/T.
Topic 2.10: Circular Motion