Skip to main content

AP® Physics C: Electricity and Magnetism Unit 13 flashcardsElectromagnetic Induction

34 cards · about 9 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 34
Due
34
Mastered
0 / 34
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Magnetic flux

    How much magnetic field passes through a surface. For a uniform field and a flat surface, ΦB=B⃗⋅A⃗=BAcos⁡θ\Phi_B = \vec{B} \cdot \vec{A} = BA\cos\theta, where θ is the angle between the field and the area vector.

    Topic 13.1: Magnetic Flux

  • Weber (Wb)

    The SI unit of magnetic flux: 1 Wb = 1 T·m². A changing flux of 1 Wb per second induces 1 V.

    Topic 13.1: Magnetic Flux

  • Flux of a nonuniform magnetic field

    When B varies over a surface, add it up piece by piece: ΦB=∫B⃗⋅dA⃗\Phi_B = \int \vec{B} \cdot d\vec{A}. Choose strips where B is constant, like thin strips parallel to a long wire.

    Topic 13.1: Magnetic Flux

  • Sign of magnetic flux

    Flux is positive when the field points the same general way as the area vector and negative when it points the opposite way. Flipping a loop over in a field changes its flux from +BA to −BA.

    Topic 13.1: Magnetic Flux

  • Faraday’s law

    A changing magnetic flux induces an emf: E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}. For a coil of N turns, E=−NdΦBdt\mathcal{E} = -N\frac{d\Phi_B}{dt}.

    Topic 13.2: Electromagnetic Induction

  • Three ways to change flux

    Change the field’s strength, change the loop’s area, or change the angle between the field and the loop (by turning it). Any of them induces an emf.

    Topic 13.2: Electromagnetic Induction

  • Lenz’s law

    The induced current flows in the direction that makes its own magnetic field oppose the change in flux. That’s what the minus sign in Faraday’s law means.

    Topic 13.2: Electromagnetic Induction

  • Induced electric field

    A changing magnetic field creates an electric field that circles around it: ∮E⃗⋅dℓ⃗=−dΦBdt\oint \vec{E} \cdot d\vec{\ell} = -\frac{d\Phi_B}{dt}. Its field lines form closed loops instead of starting on charges.

    Topic 13.2: Electromagnetic Induction

  • Maxwell’s third equation

    Faraday’s law of induction, one of the four equations that together describe all of electricity and magnetism: a changing magnetic flux produces an electric field.

    Topic 13.2: Electromagnetic Induction

  • Generator emf

    A coil of N turns and area A spinning at angular speed ω in a field B makes E=NBAωsin⁡ωt\mathcal{E} = NBA\omega\sin\omega t, with peak NBAωNBA\omega.

    Topic 13.2: Electromagnetic Induction

  • Electromagnetic waves

    Maxwell’s equations predict that changing electric and magnetic fields keep making each other and travel through empty space at the speed of light. Light is one of these waves.

    Topic 13.2: Electromagnetic Induction

  • Motional emf

    A conductor of length ℓ moving at speed v perpendicular to a field B has E=Bℓv\mathcal{E} = B\ell v across it, because the field pushes its charges along it.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Magnetic braking

    The force on an induced current always opposes the motion that caused it. Moving conductors near magnets slow down, which is used in train and roller coaster brakes.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Force on a sliding bar

    A bar on rails with resistance R in the loop feels a retarding force F=B2ℓ2vRF = \frac{B^2\ell^2v}{R}. The faster it moves, the harder it is pushed back.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Terminal speed on vertical rails

    A bar falling on vertical rails speeds up until the magnetic force balances gravity: B2ℓ2vR=mg\frac{B^2\ell^2v}{R} = mg, so vT=mgRB2ℓ2v_T = \frac{mgR}{B^2\ell^2}.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Eddy currents

    Swirls of induced current inside a solid piece of metal moving through a changing field. They waste energy as heat and slow the metal down, so cutting slots in it reduces them.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Loop moving through a field

    There’s an induced current and a retarding force only while the loop’s flux is changing: while it enters or leaves the field. Fully inside a uniform field, there’s neither.

    Topic 13.3: Induced Currents and Magnetic Forces

  • Inductance

    How strongly a conductor opposes a change in its current, in henries (H). An inductor with L=NΦBIL = \frac{N\Phi_B}{I} has N turns linked by the flux its own current makes.

    Topic 13.4: Inductance

  • Inductor

    A circuit element, usually a coil like a solenoid, with large inductance. Straight wires are usually treated as having zero inductance.

    Topic 13.4: Inductance

  • Self-induced emf

    E=−LdIdt\mathcal{E} = -L\frac{dI}{dt}. An inductor pushes back against an increasing current and pushes forward to keep a decreasing current going.

    Topic 13.4: Inductance

  • Henry (H)

    The SI unit of inductance: 1 H = 1 V·s/A. A current changing at 1 A/s through a 1 H inductor induces 1 V.

    Topic 13.4: Inductance

  • Inductance of a solenoid

    L=μN2AℓL = \frac{\mu N^2A}{\ell}. Doubling the turns quadruples L, and an iron core, with its large permeability μ, raises it a lot.

    Topic 13.4: Inductance

  • Energy stored in an inductor

    UL=12LI2U_L = \frac{1}{2}LI^2, stored in the magnetic field. It can later be dissipated in a resistor or used to charge a capacitor.

    Topic 13.4: Inductance

  • LR time constant

    τ=LR\tau = \frac{L}{R}. In one time constant a growing current reaches about 63% of its final value, and a decaying one falls to about 37%.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • Current rising in an LR circuit

    After a switch connects a battery: I(t)=ER(1−e−t/τ)I(t) = \frac{\mathcal{E}}{R}\left(1 - e^{-t/\tau}\right). It starts at zero and levels off at ER\frac{\mathcal{E}}{R}.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • Current decaying in an LR circuit

    When the battery is removed and the inductor drives current through R: I(t)=I0e−t/τI(t) = I_0e^{-t/\tau}. The inductor’s stored energy ends up in the resistor.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • LR loop equation

    Kirchhoff’s loop rule for a series LR circuit: E=IR+LdIdt\mathcal{E} = IR + L\frac{dI}{dt}. Solving it gives the exponential current.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • Inductor right after switching

    An inductor keeps its current from jumping. If it had no current, it acts like a break the instant a switch closes, and its emf equals the potential difference across its branch.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • Inductor after a long time

    Once the current is steady, dI/dt = 0, so the inductor has no emf and acts like a plain wire with zero resistance.

    Topic 13.5: Circuits with Resistors and Inductors (LR Circuits)

  • LC circuit

    A charged capacitor connected to an inductor. Energy sloshes back and forth between the capacitor’s electric field and the inductor’s magnetic field.

    Topic 13.6: Circuits with Capacitors and Inductors (LC Circuits)

  • LC differential equation

    The loop rule gives d2qdt2=−1LCq\frac{d^2q}{dt^2} = -\frac{1}{LC}q, the same form as a mass on a spring, so the charge oscillates.

    Topic 13.6: Circuits with Capacitors and Inductors (LC Circuits)

  • LC angular frequency

    ω=1LC\omega = \frac{1}{\sqrt{LC}}, so the period is T=2πLCT = 2\pi\sqrt{LC}. Bigger L or C makes slower oscillations.

    Topic 13.6: Circuits with Capacitors and Inductors (LC Circuits)

  • Energy in an LC circuit

    With no resistance the total energy stays constant: Qmax22C=12LImax2\frac{Q_{max}^2}{2C} = \frac{1}{2}LI_{max}^2. The current is largest when the capacitor has no charge.

    Topic 13.6: Circuits with Capacitors and Inductors (LC Circuits)

  • LC and spring analogy

    Charge acts like position, current like velocity, inductance like mass and 1/C like the spring constant.

    Topic 13.6: Circuits with Capacitors and Inductors (LC Circuits)