Skip to main content

AP® Physics C: Electricity and Magnetism Unit 10 flashcardsConductors and Capacitors

31 cards · about 8 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 31
Due
31
Mastered
0 / 31
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Conductor in electrostatic equilibrium

    Zero field inside the metal, all extra charge on the outer surface, field just outside perpendicular to the surface, and the same potential everywhere.

    Topic 10.1: Electrostatics with Conductors

  • Field just outside a conductor

    E=σε0E = \frac{\sigma}{\varepsilon_0}, perpendicular to the surface, where σ is the local surface charge density.

    Topic 10.1: Electrostatics with Conductors

  • Conductor as an equipotential

    Every point on and inside a conductor in equilibrium is at the same potential. If it weren't, charge would flow.

    Topic 10.1: Electrostatics with Conductors

  • Charge on sharp points

    On a charged conductor, charge crowds onto the most sharply curved spots, so the field is strongest there. That's why lightning rods are pointed.

    Topic 10.1: Electrostatics with Conductors

  • Electrostatic shielding

    A closed metal shell with nothing inside keeps outside electric fields out of its hollow. This is how a Faraday cage works.

    Topic 10.1: Electrostatics with Conductors

  • Charge inside a metal shell

    A charge q in the hollow of a neutral shell induces −q on the inner surface and +q on the outer surface. The outside field is still that of q.

    Topic 10.1: Electrostatics with Conductors

  • Potential of a charged metal sphere

    V=kQRV = \frac{kQ}{R} everywhere inside and on the sphere, and kQr\frac{kQ}{r} outside. The field inside is zero.

    Topic 10.1: Electrostatics with Conductors

  • Dielectric breakdown

    When a field gets strong enough (about 3 × 10⁶ V/m in air), an insulator starts to conduct and sparks jump.

    Topic 10.1: Electrostatics with Conductors

  • Joined conductors

    When conductors touch or are wired together, charge flows until they're all at the same potential, not until they have equal charge.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Charge sharing between spheres

    Far-apart spheres joined by a wire split charge in proportion to their radii, since kq/r must match. The smaller one has less charge but a stronger surface field.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Ground as zero potential

    Earth, treated as a huge conductor at zero potential. It can give or take charge without its potential changing noticeably.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Order of steps in induction

    Cut the ground connection while the charged object is still nearby. If you take the object away first, charge flows back and the conductor ends up neutral.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Electrons do the moving

    In metal, only electrons flow. A conductor 'gaining positive charge' is really losing electrons.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Touching the inside of a hollow conductor

    A charged object touched to the inside of a hollow conductor gives up all its charge to the outer surface. Van de Graaff generators use this.

    Topic 10.2: Redistribution of Charge Between Conductors

  • Capacitor

    Two conductors holding equal and opposite charges, separated by an insulator. It stores separated charge and energy.

    Topic 10.3: Capacitors

  • Capacitance

    C=QΔVC = \frac{Q}{\Delta V}, the charge stored per volt. It depends only on the conductors' shape and spacing and what's between them.

    Topic 10.3: Capacitors

  • Farad

    The unit of capacitance: 1 F = 1 C/V. A farad is huge; real capacitors are usually in μF, nF or pF.

    Topic 10.3: Capacitors

  • Parallel-plate capacitance

    C=κε0AdC = \frac{\kappa\varepsilon_0 A}{d}. Bigger plates or a smaller gap mean more capacitance.

    Topic 10.3: Capacitors

  • Field between parallel plates

    Nearly uniform: E=ΔVd=Qε0AE = \frac{\Delta V}{d} = \frac{Q}{\varepsilon_0 A}. A charge in the gap feels a constant force and moves like a projectile.

    Topic 10.3: Capacitors

  • Spherical capacitor

    C=4πε0abb−aC = \frac{4\pi\varepsilon_0 ab}{b - a} for spheres of radii a < b. Let b go to infinity and an isolated sphere has C=4πε0aC = 4\pi\varepsilon_0 a.

    Topic 10.3: Capacitors

  • Cylindrical (coaxial) capacitor

    C=2πε0Lln⁡(b/a)C = \frac{2\pi\varepsilon_0 L}{\ln(b/a)} for coaxial conductors of radii a < b and length L.

    Topic 10.3: Capacitors

  • Finding capacitance with Gauss's law

    Put ±Q on the conductors, find E with Gauss's law, integrate to get ΔV, then C=QΔVC = \frac{Q}{\Delta V}.

    Topic 10.3: Capacitors

  • Energy stored in a capacitor

    UC=12QΔV=12C(ΔV)2=Q22CU_C = \frac{1}{2}Q\Delta V = \frac{1}{2}C(\Delta V)^2 = \frac{Q^2}{2C}. It's the area under a graph of ΔV versus Q.

    Topic 10.3: Capacitors

  • Energy density of a field

    u=12ε0E2u = \frac{1}{2}\varepsilon_0E^2, the energy per cubic meter stored in an electric field.

    Topic 10.3: Capacitors

  • Isolated vs. connected capacitor

    Isolated (disconnected): Q stays fixed. Connected to a battery: ΔV stays fixed. Decide which first, then see what changes.

    Topic 10.4: Dielectrics

  • Dielectric

    An insulator placed between capacitor plates. It polarizes in the field, weakening it, so the capacitance goes up.

    Topic 10.4: Dielectrics

  • Dielectric constant (κ)

    How many times a material multiplies capacitance compared with a vacuum. κ = 1 for vacuum, about 1 for air, and more than 1 for any material.

    Topic 10.4: Dielectrics

  • Bound charge in a dielectric

    Charge that appears on a dielectric's surfaces when its molecules line up. It can't flow, but it partly cancels the plates' field.

    Topic 10.4: Dielectrics

  • Permittivity of a material

    ε=κε0\varepsilon = \kappa\varepsilon_0. It replaces ε0\varepsilon_0 in formulas when the space is filled with the material.

    Topic 10.4: Dielectrics

  • Adding a dielectric with Q fixed

    C rises by κ, while ΔV, E and stored energy all drop by κ.

    Topic 10.4: Dielectrics

  • Adding a dielectric with ΔV fixed

    C, Q and stored energy all rise by κ, and the field stays the same. The battery supplies the extra charge.

    Topic 10.4: Dielectrics