AP® Physics 2: Algebra-Based Unit 9 flashcardsThermodynamics
35 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 35
- Due
- 35
- Mastered
- 0 / 35
This card: New
Flip the card before you rate it.
Pressure (kinetic theory)
The total perpendicular force from gas atoms hitting a surface, divided by the area: . It exists everywhere in the gas, not just at the walls.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Temperature and kinetic energy
Temperature measures the average kinetic energy of a system's atoms: , with T in kelvins. Double T, double the average kinetic energy.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Boltzmann constant
J/K. It links the temperature of a gas to the energy of its individual atoms. It's R divided by Avogadro's number.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Root-mean-square (rms) speed
A typical atom speed set by temperature: , so . Lighter atoms move faster at the same T.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Maxwell–Boltzmann distribution
A graph of how many atoms in a gas have each speed. Heating the gas shifts the peak to higher speeds and makes the curve lower and wider; the area stays the same.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Momentum change in a wall collision
An atom bouncing elastically off a wall reverses only its perpendicular velocity, so its momentum changes by 2mv⊥. Many such hits each second add up to the gas's pressure.
Topic 9.1: Kinetic Theory of Temperature and Pressure
Ideal gas
A model gas whose atoms are tiny compared with the space they fill, move randomly, collide elastically and exert no forces except in collisions. Real gases act like this at low density.
Topic 9.2: The Ideal Gas Law
Ideal gas law
. It links pressure, volume, amount (moles n or atoms N) and absolute temperature. Always use T in kelvins and V in m³.
Topic 9.2: The Ideal Gas Law
Universal gas constant (R)
J/(mol·K). Use it with moles in PV = nRT. Use instead when you count individual atoms.
Topic 9.2: The Ideal Gas Law
Mole
An amount of substance holding Avogadro's number of particles, . So N = n × 6.02 × 10²³.
Topic 9.2: The Ideal Gas Law
Kelvin scale
Absolute temperature, measured from absolute zero. T(K) = T(°C) + 273. A change of 1 K equals a change of 1 °C, but ratios only make sense in kelvins.
Topic 9.2: The Ideal Gas Law
Absolute zero
0 K, or about −273 °C. Extending a pressure–temperature graph for a gas at constant volume down to zero pressure points to this temperature.
Topic 9.2: The Ideal Gas Law
Thermal contact
Two systems are in thermal contact when energy can pass between them by thermal processes. Energy flows on its own from the hotter one to the colder one.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Heating and cooling
Heating is energy moving into a system by thermal processes; cooling is energy moving out. An object doesn't "contain heat"; it has internal energy.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Conduction
Energy transfer through a material by collisions between neighboring atoms, without the material itself moving. Metals conduct well; air and plastic foam don't.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Convection
Energy carried by a fluid that moves as a whole, like warm air rising and cool air sinking. It needs a liquid or gas that can flow.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Radiation (thermal)
Energy carried by electromagnetic waves, such as infrared light. It's the only thermal process that works across a vacuum, which is how sunlight warms Earth.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Thermal equilibrium
The state where systems in thermal contact have the same temperature, so no net energy flows between them. It's the most probable outcome after many atomic collisions.
Topic 9.3: Thermal Energy Transfer and Equilibrium
Internal energy (U)
The total kinetic and potential energy of the particles inside a system. For an ideal monatomic gas there's no potential energy, so : it depends only on T.
Topic 9.4: The First Law of Thermodynamics
First law of thermodynamics
: a system's internal energy changes by the energy added by heating plus the work done on it. It's conservation of energy for thermal systems.
Topic 9.4: The First Law of Thermodynamics
Work done on a gas
. Squeeze the gas (ΔV < 0) and W is positive; let it expand and W is negative, because the gas is doing work on its surroundings.
Topic 9.4: The First Law of Thermodynamics
PV diagram
A graph of pressure against volume showing a gas's states and processes. The area under a path is the size of the work; the area inside a cycle is the net work.
Topic 9.4: The First Law of Thermodynamics
Isotherm
A curve on a PV diagram where temperature is constant, so PV is constant. Isotherms farther from the origin are at higher temperatures.
Topic 9.4: The First Law of Thermodynamics
Isobaric process
A process at constant pressure. The work done on the gas is , and it shows up as a horizontal line on a PV diagram.
Topic 9.4: The First Law of Thermodynamics
Isovolumetric process
A process at constant volume, a vertical line on a PV diagram. No work is done, so all the energy from heating changes the internal energy: ΔU = Q.
Topic 9.4: The First Law of Thermodynamics
Isothermal process
A process at constant temperature. For an ideal gas ΔU = 0, so Q = −W: energy in by heating leaves as work, or work done on the gas leaves by cooling.
Topic 9.4: The First Law of Thermodynamics
Adiabatic process
A process with no energy transferred by heating (Q = 0), so ΔU = W. Adiabatic compression warms a gas, and adiabatic expansion cools it.
Topic 9.4: The First Law of Thermodynamics
Specific heat (c)
The energy needed to raise 1 kg of a material by 1 K, so . Water's is high (about 4200 J/(kg·K)), so it warms and cools slowly.
Topic 9.5: Specific Heat and Thermal Conductivity
Thermal conductivity (k)
A material property describing how well it conducts energy. Metals have high k; wood, plastic foam and air have low k, which makes them good insulators.
Topic 9.5: Specific Heat and Thermal Conductivity
Rate of conduction
. Energy flows faster through a bigger area or across a bigger temperature difference, and slower through a thicker layer.
Topic 9.5: Specific Heat and Thermal Conductivity
Entropy
A measure of how spread out a system's energy is, or how much of it is no longer available to do work. It's a state function, depending only on the current state.
Topic 9.6: Entropy and the Second Law of Thermodynamics
Second law of thermodynamics
The total entropy of an isolated system never decreases. It stays constant only if every process is reversible; real processes make it increase.
Topic 9.6: Entropy and the Second Law of Thermodynamics
Isolated system
A system that exchanges neither matter nor energy with its surroundings. Its entropy can only stay the same or increase.
Topic 9.6: Entropy and the Second Law of Thermodynamics
Closed system
A system that can exchange energy, but not matter, with its surroundings. Its entropy can decrease if energy leaves it, as when water freezes in a freezer.
Topic 9.6: Entropy and the Second Law of Thermodynamics
Thermodynamic equilibrium
The state an isolated system moves toward on its own, where nothing changes on the large scale. Entropy is at its maximum there.
Topic 9.6: Entropy and the Second Law of Thermodynamics