AP® Physics 2: Algebra-Based Unit 11 flashcardsElectric Circuits
28 cards · about 7 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 28
- Due
- 28
- Mastered
- 0 / 28
This card: New
Flip the card before you rate it.
Electric current
The rate charge passes through a cross section: , in amperes (1 A = 1 C/s). It isn't used up as it goes around a circuit.
Topic 11.1: Electric Current
Conventional current
The direction positive charge would move, from + to − outside a battery. In metal wires, electrons actually drift the opposite way.
Topic 11.1: Electric Current
Emf (ε)
The potential difference a battery supplies when no current flows through it. It's what pushes charge around a circuit.
Topic 11.1: Electric Current
Charge carriers
The charged particles that move to make a current, usually electrons in metal. With no current they still move randomly, just with no net flow.
Topic 11.1: Electric Current
Closed circuit
A complete loop that charge can flow around. A bulb lights only if it's part of a closed loop with a battery.
Topic 11.2: Simple Circuits
Open circuit
A circuit with a break in it, like an open switch or a removed bulb, so no charge flows in that loop.
Topic 11.2: Simple Circuits
Short circuit
A path of almost zero resistance, so charge crosses it with no change in potential. It can bypass elements and draw a large current.
Topic 11.2: Simple Circuits
Schematic diagram
A circuit drawing using standard symbols for batteries, resistors, bulbs, switches, capacitors and meters. A diagonal arrow through a symbol marks a variable element.
Topic 11.2: Simple Circuits
Resistance
How strongly an object opposes current, in ohms. For a uniform wire : longer means more resistance, thicker means less.
Topic 11.3: Resistance, Resistivity, and Ohm’s Law
Resistivity (ρ)
A material property, in Ω·m, measuring how strongly it opposes current. Copper's is tiny; rubber's is huge. For most metals it rises with temperature.
Topic 11.3: Resistance, Resistivity, and Ohm’s Law
Ohm's law
. For an ohmic element, current is proportional to potential difference, so an I-against-ΔV graph is a line through the origin with slope 1/R.
Topic 11.3: Resistance, Resistivity, and Ohm’s Law
Ohmic vs. nonohmic
An ohmic element keeps the same resistance at every current. A nonohmic one doesn't: a bulb's filament gets hotter and its resistance rises.
Topic 11.3: Resistance, Resistivity, and Ohm’s Law
Electric power
The rate an element transfers energy: , in watts. A bulb with more power glows brighter.
Topic 11.4: Electric Power
Brightness of bulbs
Brightness goes up with power. In series, the bigger resistance gets more power; in parallel across a battery, the smaller resistance gets more.
Topic 11.4: Electric Power
Resistors in series
One path, same current through each. , and the voltage splits in proportion to resistance.
Topic 11.5: Compound Direct Current (DC) Circuits
Resistors in parallel
Several paths, same potential difference across each. , so adding branches lowers the total.
Topic 11.5: Compound Direct Current (DC) Circuits
Internal resistance
A real battery's own resistance, r, in series with an ideal emf. With current flowing, the terminal voltage is , less than the emf.
Topic 11.5: Compound Direct Current (DC) Circuits
Ammeter
Measures current. It goes in series with the element, and an ideal one has zero resistance so it doesn't change the current.
Topic 11.5: Compound Direct Current (DC) Circuits
Voltmeter
Measures potential difference. It connects in parallel across the element, and an ideal one has infinite resistance so no current goes through it.
Topic 11.5: Compound Direct Current (DC) Circuits
Kirchhoff's loop rule
The potential differences around any closed loop add to zero, . It's conservation of energy: a charge returns to its starting potential.
Topic 11.6: Kirchhoff’s Loop Rule
Potential graph around a loop
Going around a loop, the potential jumps up at the battery, stays flat along ideal wires and drops by IR across each resistor, ending where it began.
Topic 11.6: Kirchhoff’s Loop Rule
Kirchhoff's junction rule
The current into a junction equals the current out, . It's conservation of charge: charge doesn't pile up.
Topic 11.7: Kirchhoff’s Junction Rule
Junction
A point where three or more wires meet, so the current splits or combines. The branch with less resistance takes more current.
Topic 11.7: Kirchhoff’s Junction Rule
Capacitors in parallel
They share the same voltage, and their capacitances add: . That's the opposite of resistors.
Topic 11.8: Resistor-Capacitor (RC) Circuits
Capacitors in series
. Each holds the same charge, and the total is smaller than the smallest one.
Topic 11.8: Resistor-Capacitor (RC) Circuits
Time constant (τ)
. In one τ, a charging capacitor reaches about 63% of its final charge; a discharging one falls to about 37%.
Topic 11.8: Resistor-Capacitor (RC) Circuits
Uncharged capacitor at t = 0
Right after a switch closes, an uncharged capacitor acts like a plain wire: charge flows onto it easily, and its branch carries the biggest current.
Topic 11.8: Resistor-Capacitor (RC) Circuits
Capacitor at steady state
After many time constants, a charged capacitor's branch carries no current, like an open switch. The capacitor holds the voltage of whatever it's in parallel with.
Topic 11.8: Resistor-Capacitor (RC) Circuits