Skip to main content

AP® Chemistry Unit 4 flashcardsChemical Reactions

37 cards · about 9 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 37
Due
37
Mastered
0 / 37
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Physical change

    A change in form or phase, like melting or boiling, that doesn't make a new substance. Only the attractions between particles change.

    Topic 4.1: Introduction for Reactions

  • Chemical change

    A change that makes new substances by breaking and forming chemical bonds, like rusting or burning.

    Topic 4.1: Introduction for Reactions

  • Evidence of a chemical reaction

    Clues include gas bubbles, a precipitate, a color change, or heat or light given off. None is proof alone: boiling water bubbles too.

    Topic 4.1: Introduction for Reactions

  • Precipitate

    An insoluble solid that forms when two solutions are mixed, like the white AgCl that forms when AgNO₃ and NaCl solutions meet.

    Topic 4.1: Introduction for Reactions

  • Balanced equation

    An equation with the same number of each kind of atom and the same total charge on both sides, because atoms and charge are conserved.

    Topic 4.2: Net Ionic Equations

  • Molecular equation

    An equation that writes every compound as a full formula, even if it's dissolved and split into ions: AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq).

    Topic 4.2: Net Ionic Equations

  • Complete ionic equation

    An equation that splits every dissolved strong electrolyte into its separate ions, while solids, liquids, gases and weak acids stay written as compounds.

    Topic 4.2: Net Ionic Equations

  • Net ionic equation

    An equation showing only the particles that actually change, with spectator ions removed. For AgNO₃ + NaCl it's Ag⁺(aq) + Cl⁻(aq) → AgCl(s).

    Topic 4.2: Net Ionic Equations

  • Spectator ion

    An ion that appears unchanged on both sides of a complete ionic equation, like Na⁺ and NO₃⁻ in the AgCl precipitation. Leave it out of the net ionic equation.

    Topic 4.2: Net Ionic Equations

  • Weak acids in ionic equations

    A weak acid like CH₃COOH stays mostly as molecules in water, so write it as a whole molecule, not as H⁺ and its anion.

    Topic 4.2: Net Ionic Equations

  • Particle diagram of a reaction

    A drawing of a reaction that keeps every atom, matches the ratio from the coefficients, and shows any excess reactant left over in the products.

    Topic 4.3: Representations of Reactions

  • Coefficient

    The number in front of a formula in a balanced equation. It gives the ratio of moles (or particles) that react and form, not the masses.

    Topic 4.3: Representations of Reactions

  • Chemical vs physical: bonds

    If chemical bonds break and form, it's a chemical change. If only intermolecular forces change, as in melting or boiling, it's physical.

    Topic 4.4: Physical and Chemical Changes

  • Dissolving a salt

    A borderline case: ionic attractions in the solid break and new ion-dipole attractions with water form, so it can be argued as physical or chemical.

    Topic 4.4: Physical and Chemical Changes

  • Mole ratio

    The ratio of coefficients between two substances in a balanced equation. It's the bridge in every stoichiometry problem.

    Topic 4.5: Stoichiometry

  • Stoichiometry roadmap

    Convert what you're given to moles (grams ÷ molar mass, M × V, or PVRT\frac{PV}{RT}), use the mole ratio, then convert to the unit you want.

    Topic 4.5: Stoichiometry

  • Limiting reactant

    The reactant that runs out first and so sets how much product can form. Find it by comparing how much product each reactant could make.

    Topic 4.5: Stoichiometry

  • Excess reactant

    The reactant left over after the limiting reactant is used up.

    Topic 4.5: Stoichiometry

  • Theoretical yield

    The most product that can form, calculated from the limiting reactant. Real experiments usually get less.

    Topic 4.5: Stoichiometry

  • Titrant

    The solution of known concentration added from a buret during a titration.

    Topic 4.6: Introduction to Titration

  • Analyte

    The solution in the flask whose amount or concentration you're trying to find in a titration.

    Topic 4.6: Introduction to Titration

  • Equivalence point

    The point in a titration where just enough titrant has been added to react completely with the analyte, in the ratio from the balanced equation.

    Topic 4.6: Introduction to Titration

  • Endpoint

    The point where the indicator changes color. A well-chosen indicator makes the endpoint land very close to the equivalence point.

    Topic 4.6: Introduction to Titration

  • Acid-base reaction

    A reaction in which a proton (H⁺) moves from one particle to another, like HCl + NaOH → NaCl + H₂O.

    Topic 4.7: Types of Chemical Reactions

  • Redox reaction

    A reaction in which electrons move from one particle to another, which shows up as changes in oxidation numbers.

    Topic 4.7: Types of Chemical Reactions

  • Precipitation reaction

    A reaction in which ions in solution combine to form an insoluble solid.

    Topic 4.7: Types of Chemical Reactions

  • Solubility rule to know

    Every compound containing Na⁺, K⁺, NH₄⁺ or NO₃⁻ dissolves in water. Other solubilities will be given to you.

    Topic 4.7: Types of Chemical Reactions

  • Combustion

    A redox reaction with O₂ that gives off heat and light. A hydrocarbon that burns completely forms CO₂ and H₂O.

    Topic 4.7: Types of Chemical Reactions

  • Oxidation number

    A charge assigned to each atom by bookkeeping rules: elements are 0, O is usually −2, H is usually +1, and the numbers add up to the particle's charge.

    Topic 4.7: Types of Chemical Reactions

  • Brønsted-Lowry acid

    A particle that donates a proton (H⁺). In HCl + H₂O → H₃O⁺ + Cl⁻, HCl is the acid.

    Topic 4.8: Introduction to Acid-Base Reactions

  • Brønsted-Lowry base

    A particle that accepts a proton (H⁺). In NH₃ + H₂O ⇌ NH₄⁺ + OH⁻, NH₃ is the base.

    Topic 4.8: Introduction to Acid-Base Reactions

  • Conjugate acid-base pair

    Two particles that differ by one H⁺, like NH₄⁺/NH₃ or H₂O/OH⁻. The acid loses H⁺ to become its conjugate base.

    Topic 4.8: Introduction to Acid-Base Reactions

  • Amphoteric

    Able to act as an acid or a base. Water and HCO₃⁻ can both donate or accept a proton.

    Topic 4.8: Introduction to Acid-Base Reactions

  • Oxidation

    Losing electrons, which raises the oxidation number. In Zn → Zn²⁺ + 2e⁻, zinc is oxidized.

    Topic 4.9: Oxidation-Reduction (Redox) Reactions

  • Reduction

    Gaining electrons, which lowers the oxidation number. In Cu²⁺ + 2e⁻ → Cu, copper(II) is reduced.

    Topic 4.9: Oxidation-Reduction (Redox) Reactions

  • Half-reaction

    One half of a redox reaction, showing either the electrons lost (oxidation) or the electrons gained (reduction).

    Topic 4.9: Oxidation-Reduction (Redox) Reactions

  • Balancing redox in acid

    Balance atoms other than O and H, add H₂O for O, add H⁺ for H, add e⁻ for charge, then scale so electrons lost = electrons gained.

    Topic 4.9: Oxidation-Reduction (Redox) Reactions