AP® Chemistry Unit 3 flashcardsProperties of Substances and Mixtures
40 cards · about 10 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 40
- Due
- 40
- Mastered
- 0 / 40
This card: New
Flip the card before you rate it.
Intermolecular forces (IMFs)
Attractions between separate particles. They're much weaker than the covalent bonds inside molecules, and they control boiling points, vapor pressure and solubility.
Topic 3.1: Intermolecular and Interparticle Forces
London dispersion forces
Attractions from temporary, shifting dipoles. Every molecule has them, and they get stronger as molecules have more electrons and bigger, more polarizable electron clouds.
Topic 3.1: Intermolecular and Interparticle Forces
Polarizability
How easily a particle's electron cloud gets distorted. Big atoms and molecules with many electrons are more polarizable, so they have stronger dispersion forces.
Topic 3.1: Intermolecular and Interparticle Forces
Dipole-dipole forces
Attractions between the δ+ end of one polar molecule and the δ− end of another. They add to dispersion forces, so polar molecules usually boil higher than nonpolar ones of similar size.
Topic 3.1: Intermolecular and Interparticle Forces
Hydrogen bonding
A strong dipole attraction between H bonded to N, O or F on one molecule and a lone pair on N, O or F of another. It's why water boils so high for its size.
Topic 3.1: Intermolecular and Interparticle Forces
Ion-dipole forces
Attraction between an ion and a polar molecule, like Na⁺ and the δ− oxygen of water. These forces are what let salts dissolve in water.
Topic 3.1: Intermolecular and Interparticle Forces
Dipole-induced dipole forces
A polar molecule distorts the electron cloud of a nonpolar one and attracts it. This weak force is how a little O₂ dissolves in water.
Topic 3.1: Intermolecular and Interparticle Forces
Covalent network solid
Atoms held together by a web of covalent bonds, like diamond or SiO₂. Very hard, with very high melting points, and usually no electrical conductivity.
Topic 3.2: Properties of Solids
Molecular solid
Separate molecules held together only by intermolecular forces, like ice or sugar. Low melting points, soft, and they don't conduct electricity.
Topic 3.2: Properties of Solids
Properties of ionic solids
High melting points and brittle. They don't conduct as solids, but they do when melted or dissolved, because then the ions can move.
Topic 3.2: Properties of Solids
Vapor pressure
The pressure of vapor above a liquid in a closed container. Weaker intermolecular forces mean more molecules escape, so the vapor pressure is higher.
Topic 3.2: Properties of Solids
Boiling point and IMFs
A liquid boils when its vapor pressure equals the outside pressure. Stronger intermolecular forces mean a lower vapor pressure and a higher boiling point.
Topic 3.2: Properties of Solids
Amorphous solid
A solid whose particles are jumbled with no long-range order, like glass. A crystalline solid, like salt, has a neat repeating pattern instead.
Topic 3.3: Solids, Liquids, and Gases
Particles in solids, liquids and gases
Solid particles vibrate in place; liquid particles touch but slide past each other; gas particles are far apart and move freely. That's why gases are so easy to compress.
Topic 3.3: Solids, Liquids, and Gases
Ideal gas law
PV = nRT. Use it to find any one of pressure, volume, moles or temperature from the other three. Temperature must be in kelvins.
Topic 3.4: Ideal Gas Law
Gas constant (R)
R = 0.08206 L·atm/(mol·K) or 8.314 J/(mol·K). Pick the value whose units match the rest of your problem.
Topic 3.4: Ideal Gas Law
Kelvin temperature
K = °C + 273.15. Gas laws only work in kelvins: doubling the Kelvin temperature doubles the volume at constant pressure.
Topic 3.4: Ideal Gas Law
Dalton's law of partial pressures
The total pressure of a gas mixture is the sum of each gas's partial pressure: P(total) = P(A) + P(B) + …
Topic 3.4: Ideal Gas Law
Mole fraction
Moles of one component ÷ total moles in the mixture. A gas's partial pressure equals its mole fraction × the total pressure.
Topic 3.4: Ideal Gas Law
Kinetic molecular theory
A model of gases as tiny particles in constant random motion, with elastic collisions and no attractions. It explains why gases follow PV = nRT.
Topic 3.5: Kinetic Molecular Theory
Temperature and kinetic energy
Kelvin temperature is proportional to particles' average kinetic energy (KE = ½mv²). At the same temperature, lighter particles move faster on average.
Topic 3.5: Kinetic Molecular Theory
Maxwell-Boltzmann distribution
A graph of how many particles have each speed. At a higher temperature the curve flattens, spreads out and shifts to faster speeds.
Topic 3.5: Kinetic Molecular Theory
Real gas: attractions
Attractions between particles soften their collisions with the walls, so the real pressure is lower than PV = nRT predicts. It matters most at low temperature.
Topic 3.6: Deviation from Ideal Gas Law
Real gas: particle volume
At very high pressure, the particles' own volume takes up a real share of the container, so the actual volume is larger than PV = nRT predicts.
Topic 3.6: Deviation from Ideal Gas Law
Most ideal conditions
Gases act most ideally at high temperature and low pressure, and when their particles are small with weak intermolecular forces, like helium.
Topic 3.6: Deviation from Ideal Gas Law
Solution
A homogeneous mixture: the same all the way through. A heterogeneous mixture, like sand in water, varies from place to place.
Topic 3.7: Solutions and Mixtures
Molarity (M)
Moles of solute ÷ liters of solution. A 0.50 M solution has 0.50 mol of solute in every liter.
Topic 3.7: Solutions and Mixtures
Dilution
Adding solvent lowers concentration but keeps the moles of solute the same, so M₁V₁ = M₂V₂.
Topic 3.7: Solutions and Mixtures
Hydrated ions in a particle diagram
Water's δ− oxygen points toward cations, and its δ+ hydrogens point toward anions. Show ions in the ratio of the formula: twice as many Cl⁻ as Ca²⁺ for CaCl₂.
Topic 3.8: Representations of Solutions
Chromatography
Separates a mixture using differences in attraction to a stationary phase versus a mobile phase. Parts more attracted to the stationary phase travel a shorter distance.
Topic 3.9: Separation of Solutions and Mixtures
Retention factor (Rf)
Distance a spot travels ÷ distance the solvent front travels. A low Rf means the substance clings more to the stationary phase.
Topic 3.9: Separation of Solutions and Mixtures
Distillation
Separates liquids by boiling point. The part with weaker intermolecular forces has a higher vapor pressure, boils off first and is collected after it condenses.
Topic 3.9: Separation of Solutions and Mixtures
Like dissolves like
Substances with similar intermolecular forces mix well. Polar and ionic solutes dissolve in water; nonpolar solutes dissolve in nonpolar solvents like hexane.
Topic 3.10: Solubility
Miscible
Two liquids that mix in any proportion to form one solution, like ethanol and water. Oil and water are immiscible.
Topic 3.10: Solubility
Regions of the EM spectrum
Microwaves make molecules rotate, infrared makes bonds vibrate, and UV or visible light moves electrons to higher energy levels.
Topic 3.11: Spectroscopy and the Electromagnetic Spectrum
Photon energy
E = hν, where h = 6.626 × 10⁻³⁴ J·s. Combine it with c = λν: shorter wavelength means higher frequency and more energy per photon.
Topic 3.12: Properties of Photons
Absorption and emission
An atom or molecule absorbs a photon only if its energy exactly matches the gap between two levels, and it emits a photon of that same energy when it drops back.
Topic 3.12: Properties of Photons
Beer-Lambert law
A = εbc: absorbance equals molar absorptivity × path length × concentration. At a fixed wavelength and path length, absorbance is proportional to concentration.
Topic 3.13: Beer-Lambert Law
Calibration curve
A plot of absorbance against known concentrations. It's a straight line, so you can read off an unknown's concentration from its measured absorbance.
Topic 3.13: Beer-Lambert Law
Choosing a wavelength
Measure absorbance at the wavelength the substance absorbs most strongly. That gives the biggest change in absorbance per change in concentration.
Topic 3.13: Beer-Lambert Law