AP® Chemistry Unit 2 flashcardsCompound Structure and Properties
34 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 34
- Due
- 34
- Mastered
- 0 / 34
This card: New
Flip the card before you rate it.
Nonpolar covalent bond
A bond where two atoms share electrons about equally, because their electronegativities are the same or very close, as in H₂ or C–H.
Topic 2.1: Types of Chemical Bonds
Polar covalent bond
A bond where electrons are shared unequally. The more electronegative atom gets a partial negative charge (δ−) and the other a partial positive charge (δ+).
Topic 2.1: Types of Chemical Bonds
Ionic bond
The attraction between oppositely charged ions, formed when electrons transfer from one atom to another. Typical of a metal bonded to a nonmetal, like NaCl.
Topic 2.1: Types of Chemical Bonds
Electronegativity difference
The bigger the gap in electronegativity between two bonded atoms, the more polar the bond. Bonds sit on a range from nonpolar covalent to polar covalent to ionic.
Topic 2.1: Types of Chemical Bonds
Partial charge (δ+ / δ−)
A small, uneven charge on the atoms of a polar bond. In H–Cl, Cl is δ− and H is δ+ because Cl pulls the shared electrons toward itself.
Topic 2.1: Types of Chemical Bonds
Potential energy curve
A graph of energy against the distance between two nuclei. The lowest point marks the bond length, and its depth is the energy needed to break the bond.
Topic 2.2: Intramolecular Force and Potential Energy
Bond length
The distance between two bonded nuclei where the potential energy is lowest. Too close and the nuclei repel; too far and the attraction weakens.
Topic 2.2: Intramolecular Force and Potential Energy
Bond energy
The energy needed to break a bond and pull the atoms fully apart. It equals the depth of the dip on the potential energy curve.
Topic 2.2: Intramolecular Force and Potential Energy
Bond order
The number of bonding pairs between two atoms: 1 for single, 2 for double, 3 for triple. Higher bond order means a shorter, stronger bond.
Topic 2.2: Intramolecular Force and Potential Energy
Coulombic attraction in ionic solids
Ions with bigger charges and smaller radii attract each other more strongly. That's why MgO (2+ and 2−) melts far higher than NaCl (1+ and 1−).
Topic 2.2: Intramolecular Force and Potential Energy
Crystal lattice
The repeating 3-D pattern of particles in a crystalline solid. In an ionic lattice, each ion is surrounded by ions of the opposite charge.
Topic 2.3: Structure of Ionic Solids
Particle model of an ionic solid
Draw cations and anions alternating, in the ratio given by the formula, with sensible sizes. In NaCl, each Cl⁻ is drawn larger than each Na⁺.
Topic 2.3: Structure of Ionic Solids
Brittleness of ionic solids
If a force shifts one layer of ions, like charges line up next to each other and repel, so the crystal cracks instead of bending.
Topic 2.3: Structure of Ionic Solids
Electron sea model
A model of metals as positive ions sitting in a 'sea' of delocalized valence electrons. The moving electrons explain why metals conduct electricity and heat.
Topic 2.4: Structure of Metals and Alloys
Malleability of metals
Metals can be hammered into sheets because the delocalized electrons keep holding the ions together even when layers of ions slide past each other.
Topic 2.4: Structure of Metals and Alloys
Alloy
A mixture of a metal with one or more other elements that keeps metallic properties. Alloys are often harder or stronger than the pure metal.
Topic 2.4: Structure of Metals and Alloys
Substitutional alloy
An alloy where atoms of similar size replace some of the host metal's atoms. Brass is copper with some atoms swapped for zinc.
Topic 2.4: Structure of Metals and Alloys
Interstitial alloy
An alloy where much smaller atoms fill the gaps between the host metal's atoms. In steel, carbon sits between iron atoms, making the metal harder and less malleable.
Topic 2.4: Structure of Metals and Alloys
Lewis diagram
A drawing of a molecule's valence electrons, with lines for bonding pairs and dots for lone pairs. Start by counting every valence electron in the particle.
Topic 2.5: Lewis Diagrams
Lone pair
A pair of valence electrons that belongs to one atom and isn't shared in a bond. Lone pairs still take up space and affect a molecule's shape.
Topic 2.5: Lewis Diagrams
Bonding pair
A pair of electrons shared between two atoms, drawn as a line in a Lewis diagram. A double bond is two bonding pairs; a triple bond is three.
Topic 2.5: Lewis Diagrams
Octet rule
Atoms tend to end up with 8 valence electrons around them (hydrogen with 2). When you run short, turn lone pairs into double or triple bonds.
Topic 2.5: Lewis Diagrams
Resonance
When two or more valid Lewis diagrams differ only in where the electrons sit, like the three equal diagrams of NO₃⁻.
Topic 2.6: Resonance and Formal Charge
Resonance hybrid
The real particle is a blend of its resonance diagrams. In NO₃⁻, all three N–O bonds are the same length, with a bond order of .
Topic 2.6: Resonance and Formal Charge
Formal charge
Valence electrons − lone-pair electrons − number of bonds. It's bookkeeping that helps you choose the best Lewis diagram.
Topic 2.6: Resonance and Formal Charge
Choosing the best Lewis diagram
Pick the diagram with formal charges closest to zero. If a negative formal charge is needed, it should sit on the most electronegative atom.
Topic 2.6: Resonance and Formal Charge
VSEPR theory
Electron domains around a central atom push each other as far apart as possible. Count the domains to predict the shape and bond angles.
Topic 2.7: VSEPR and Hybridization
Electron domain
A region of electrons around a central atom: a lone pair or a bond. A single, double or triple bond each counts as one domain.
Topic 2.7: VSEPR and Hybridization
Linear and trigonal planar
Two domains give a linear shape at 180° (CO₂). Three domains give trigonal planar at 120° (BF₃), or bent if one domain is a lone pair (SO₂).
Topic 2.7: VSEPR and Hybridization
Tetrahedral family
Four domains: tetrahedral at 109.5° (CH₄), trigonal pyramidal with one lone pair (NH₃, about 107°), bent with two (H₂O, about 104.5°).
Topic 2.7: VSEPR and Hybridization
Molecular polarity
A molecule is polar if its bond dipoles don't cancel. CO₂ has polar bonds but is nonpolar because it's symmetric; H₂O is bent, so it's polar.
Topic 2.7: VSEPR and Hybridization
Hybridization
Match it to the number of electron domains on an atom: 2 domains → sp, 3 → sp², 4 → sp³.
Topic 2.7: VSEPR and Hybridization
Sigma (σ) bond
The first bond between two atoms, with electron density right along the line between the nuclei. Every single, double or triple bond has exactly one.
Topic 2.7: VSEPR and Hybridization
Pi (π) bond
An extra bond formed by side-by-side overlap of p orbitals, above and below the bond axis. A double bond has one π bond; a triple bond has two.
Topic 2.7: VSEPR and Hybridization