AP® Chemistry Unit 1 flashcardsAtomic Structure and Properties
37 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 37
- Due
- 37
- Mastered
- 0 / 37
This card: New
Flip the card before you rate it.
Mole
The chemist's counting unit: 6.022 × 10²³ particles. It lets you go from grams you can weigh to atoms or molecules you can't count.
Topic 1.1: Moles and Molar Mass
Avogadro's number
6.022 × 10²³, the number of particles in one mole. Multiply moles by it to get particles; divide particles by it to get moles.
Topic 1.1: Moles and Molar Mass
Molar mass
The mass of one mole of a substance, in g/mol. Add up the atomic masses in the formula: H₂O is 2(1.008) + 16.00 = 18.02 g/mol.
Topic 1.1: Moles and Molar Mass
Atomic mass unit (amu)
A tiny mass unit for single particles. One particle's mass in amu has the same number as one mole's mass in grams, so CO₂ is 44.01 amu and 44.01 g/mol.
Topic 1.1: Moles and Molar Mass
Grams → moles → particles
Divide grams by molar mass to get moles, then multiply by 6.022 × 10²³ to get particles. Going backward, reverse each step.
Topic 1.1: Moles and Molar Mass
Isotopes
Atoms of the same element (same number of protons) with different numbers of neutrons, so they have different masses.
Topic 1.2: Mass Spectra of Elements
Mass spectrum of an element
A graph with one peak per isotope. The peak's position gives the isotope's mass, and its height shows how common it is.
Topic 1.2: Mass Spectra of Elements
Average atomic mass
The weighted average of an element's isotope masses: Σ(mass × fractional abundance). It sits closest to the most common isotope's mass.
Topic 1.2: Mass Spectra of Elements
Mass number
Protons plus neutrons in one atom's nucleus. Subtract the atomic number to find the number of neutrons: ³⁷Cl has 37 − 17 = 20.
Topic 1.2: Mass Spectra of Elements
Law of definite proportions
A pure compound always has the same elements in the same ratio by mass, no matter where the sample came from. Pure water is always about 11.2% H by mass.
Topic 1.3: Elemental Composition of Pure Substances
Percent composition
The percent of a compound's mass that comes from each element: (mass of that element in one mole ÷ molar mass) × 100.
Topic 1.3: Elemental Composition of Pure Substances
Empirical formula
The simplest whole-number ratio of atoms in a compound. Glucose, C₆H₁₂O₆, has the empirical formula CH₂O.
Topic 1.3: Elemental Composition of Pure Substances
Finding an empirical formula
Turn each element's mass (or percent, using a 100 g sample) into moles, divide by the smallest number of moles, then scale up to whole numbers.
Topic 1.3: Elemental Composition of Pure Substances
Molecular formula
The actual number of each kind of atom in one molecule. It's a whole-number multiple of the empirical formula; divide the molar mass by the empirical formula's mass to find the multiple.
Topic 1.3: Elemental Composition of Pure Substances
Pure substance
Matter with a fixed composition: a single element or a single compound. Its percent composition never changes.
Topic 1.3: Elemental Composition of Pure Substances
Mixture
Two or more substances mixed physically in any ratio. Unlike a compound, its composition can vary from sample to sample.
Topic 1.4: Composition of Mixtures
Elemental analysis
Measuring how much of an element is in a sample. Comparing that to the pure compound's percent tells you how pure the sample is or what impurity might be there.
Topic 1.4: Composition of Mixtures
Purity
The percent of a sample's mass that is the substance you want. Find the mass of the pure substance, divide by the sample's total mass, and multiply by 100.
Topic 1.4: Composition of Mixtures
Coulomb's law
The force between charges grows with the size of the charges and drops as they get farther apart. More protons or a closer electron means a tighter hold.
Topic 1.5: Atomic Structure and Electron Configuration
Electron configuration
A list of how an atom's electrons fill subshells, like 1s² 2s² 2p⁶ 3s¹ for sodium. The superscripts add up to the number of electrons.
Topic 1.5: Atomic Structure and Electron Configuration
Aufbau principle
Electrons fill the lowest-energy subshells first: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, and so on.
Topic 1.5: Atomic Structure and Electron Configuration
Shells and subshells
Shells (n = 1, 2, 3…) are main energy levels; subshells (s, p, d, f) split each shell. An s subshell holds 2 electrons, p holds 6 and d holds 10.
Topic 1.5: Atomic Structure and Electron Configuration
Core electrons
The inner electrons in completely filled shells below the valence shell. They sit close to the nucleus and shield the valence electrons from its full charge.
Topic 1.5: Atomic Structure and Electron Configuration
Photoelectron spectroscopy (PES)
A technique that knocks electrons out of atoms with high-energy light and measures the energy needed. Its spectrum is direct evidence for subshells.
Topic 1.6: Photoelectron Spectroscopy
Binding energy
The energy needed to remove an electron from a subshell. In PES, a peak farther left (higher binding energy) means electrons held more tightly, closer to the nucleus.
Topic 1.6: Photoelectron Spectroscopy
PES peak height
The relative height of a PES peak shows how many electrons are in that subshell. A 2p⁶ peak is three times as tall as a 2s² peak.
Topic 1.6: Photoelectron Spectroscopy
Atomic radius trend
Atoms get smaller across a period (more protons, same shell) and bigger down a group (more shells).
Topic 1.7: Periodic Trends
Ionization energy
The energy needed to remove an electron from a gas-phase atom. It generally rises across a period and falls down a group.
Topic 1.7: Periodic Trends
Successive ionization energies
Each electron removed costs more energy than the last. A huge jump means you've started removing core electrons, which tells you how many valence electrons there are.
Topic 1.7: Periodic Trends
Electronegativity
How strongly an atom pulls shared electrons in a bond toward itself. It rises across a period and falls down a group; fluorine is the highest.
Topic 1.7: Periodic Trends
Electron affinity
The energy change when a gas-phase atom gains an electron. Halogens release a lot of energy when they gain one, which helps explain why they form 1− ions so readily.
Topic 1.7: Periodic Trends
Effective nuclear charge
The net positive pull a valence electron actually feels: the nuclear charge minus the shielding by core electrons. It rises across a period.
Topic 1.7: Periodic Trends
Shielding
Inner electrons block some of the nucleus's pull on outer electrons. More core shells mean more shielding, so outer electrons are easier to remove.
Topic 1.7: Periodic Trends
Ion size
A cation is smaller than its neutral atom, and an anion is larger. For ions with the same electrons, more protons means a smaller ion (Mg²⁺ < Na⁺ < F⁻).
Topic 1.7: Periodic Trends
Valence electrons
Electrons in the outermost shell. They take part in bonding, which is why elements in the same group react in similar ways.
Topic 1.8: Valence Electrons and Ionic Compounds
Predicting ion charges
Main-group elements gain or lose electrons to match the nearest noble gas: group 1 → 1+, group 2 → 2+, group 13 → 3+, group 15 → 3−, group 16 → 2−, group 17 → 1−.
Topic 1.8: Valence Electrons and Ionic Compounds
Ionic compound formula
Combine ions so the total charge is zero. Ca²⁺ and P³⁻ need three Ca²⁺ for every two P³⁻, giving Ca₃P₂.
Topic 1.8: Valence Electrons and Ionic Compounds