Skip to main content

AP® Calculus BC Unit 8 flashcardsApplications of Integration

36 cards · about 9 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 36
Due
36
Mastered
0 / 36
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Average value of a function

    The average value of f on [a, b] is 1b−a∫abf(x) dx\frac{1}{b - a} \int_a^b f(x)\,dx: the integral divided by the length of the interval.

    Topic 8.1: Finding the Average Value of a Function on an Interval

  • Average value as a rectangle

    The average value is the height of a rectangle over [a, b] with the same area as the region under f. Height × (b − a) = the integral.

    Topic 8.1: Finding the Average Value of a Function on an Interval

  • Mean Value Theorem for integrals

    If f is continuous on [a, b], then f(c) equals its average value for at least one c in [a, b]. Continuity is the condition you must check.

    Topic 8.1: Finding the Average Value of a Function on an Interval

  • Average value vs. average rate of change

    Average value of f is 1b−a∫f(x) dx\frac{1}{b - a} \int f(x)\,dx. Average rate of change is f(b)−f(a)b−a\frac{f(b) - f(a)}{b - a}. They answer different questions, so read carefully.

    Topic 8.1: Finding the Average Value of a Function on an Interval

  • Displacement from velocity

    ∫abv(t) dt\int_a^b v(t)\,dt is the change in position. Forward and backward motion cancel, so it can be negative or zero.

    Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals

  • Total distance traveled

    ∫ab∣v(t)∣ dt\int_a^b \lvert v(t) \rvert\,dt, the integral of speed. Split the interval where v changes sign and add the sizes of the pieces.

    Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals

  • Position from velocity

    x(b)=x(a)+∫abv(t) dtx(b) = x(a) + \int_a^b v(t)\,dt. Start with the known position and add the displacement.

    Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals

  • Velocity from acceleration

    v(b)=v(a)+∫aba(t) dtv(b) = v(a) + \int_a^b a(t)\,dt. The integral of acceleration is the change in velocity.

    Topic 8.2: Connecting Position, Velocity, and Acceleration of Functions Using Integrals

  • Net change from a rate

    If r(t) is the rate something changes, ∫abr(t) dt\int_a^b r(t)\,dt is the total change in that amount from t = a to t = b.

    Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts

  • Amount at a later time

    Amount at time b=amount at time a+∫ab(rate in−rate out) dt\text{Amount at time } b = \text{amount at time } a + \int_a^b (\text{rate in} - \text{rate out})\,dt. Don't forget the starting amount.

    Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts

  • Units of a definite integral

    Multiply the units of the rate by the units of the variable: (gallons per hour) × hours = gallons.

    Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts

  • Greatest amount (rate in vs. rate out)

    To find when an amount is greatest, check the endpoints and the times when rate in = rate out, then compare the amounts there.

    Topic 8.3: Using Accumulation Functions and Definite Integrals in Applied Contexts

  • Area between curves (vertical slices)

    Area=∫ab(top−bottom) dx\text{Area} = \int_a^b (\text{top} - \text{bottom})\,dx. The limits are x-values, often where the curves cross.

    Topic 8.4: Finding the Area Between Curves Expressed as Functions of x

  • Finding the limits for area

    Set the two curves equal and solve. The x-values (or y-values) where they meet are usually the limits of integration.

    Topic 8.4: Finding the Area Between Curves Expressed as Functions of x

  • Area between curves (horizontal slices)

    Area=∫cd(right−left) dy\text{Area} = \int_c^d (\text{right} - \text{left})\,dy. Write each curve as x in terms of y, and use y-values as the limits.

    Topic 8.5: Finding the Area Between Curves Expressed as Functions of y

  • When to slice horizontally

    Use dy when the region is easier to describe from left to right, or when slicing vertically would need more than one integral.

    Topic 8.5: Finding the Area Between Curves Expressed as Functions of y

  • Area when curves cross more than twice

    Split the integral at every crossing so you always subtract bottom from top, then add the pieces.

    Topic 8.6: Finding the Area Between Curves That Intersect at More Than Two Points

  • Area with an absolute value

    Area between f and g on [a, b] is ∫∣f(x)−g(x)∣ dx\int \lvert f(x) - g(x) \rvert\,dx. It's the quickest route on a calculator when the curves switch places.

    Topic 8.6: Finding the Area Between Curves That Intersect at More Than Two Points

  • Volume by cross sections

    Volume=∫A(x) dx\text{Volume} = \int A(x)\,dx, where A(x) is the area of a slice perpendicular to the x-axis. Find the slice's side length from the base region first.

    Topic 8.7: Volumes with Cross Sections: Squares and Rectangles

  • Square cross sections

    If each slice is a square with side s, its area is s². For a base between curves, s = top − bottom, and V=∫s2 dxV = \int s^2\,dx.

    Topic 8.7: Volumes with Cross Sections: Squares and Rectangles

  • Rectangle cross sections

    Area of a slice = base × height. The base comes from the region; the height is given, such as "height equal to twice the base."

    Topic 8.7: Volumes with Cross Sections: Squares and Rectangles

  • Semicircle cross section area

    A semicircle with diameter s has area π8s2\frac{\pi}{8}s^2. The radius is s2\frac{s}{2}, and you take half of π(s2)2\pi\left(\frac{s}{2}\right)^2.

    Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles

  • Equilateral triangle cross section area

    An equilateral triangle with side s has area 34s2\frac{\sqrt{3}}{4}s^2.

    Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles

  • Isosceles right triangle cross sections

    With a leg in the base, area = 12s2\frac{1}{2}s^2. With the hypotenuse in the base, area = 14s2\frac{1}{4}s^2.

    Topic 8.8: Volumes with Cross Sections: Triangles and Semicircles

  • Solid of revolution

    The solid you get by spinning a flat region around a line, called the axis of rotation.

    Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis

  • Disc method

    When the region touches the axis, each slice is a disc of area πr². Volume=π∫r2 dx\text{Volume} = \pi \int r^2\,dx (or dy), with r the distance from the axis to the curve.

    Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis

  • Disc method about the y-axis

    Slice perpendicular to the y-axis and write x in terms of y. Volume=π∫cd(x(y))2 dy\text{Volume} = \pi \int_c^d (x(y))^2\,dy.

    Topic 8.9: Volume with Disc Method: Revolving Around the x- or y-Axis

  • Radius about a horizontal line

    For the axis y = k, a curve y = f(x) is ∣k−f(x)∣\lvert k - f(x) \rvert away. If the axis is above the curve, the radius is k − f(x); if it's below, f(x) − k.

    Topic 8.10: Volume with Disc Method: Revolving Around Other Axes

  • Radius about a vertical line

    For the axis x = h, slice horizontally. A curve x = g(y) is ∣h−g(y)∣\lvert h - g(y) \rvert away, and you integrate with dy.

    Topic 8.10: Volume with Disc Method: Revolving Around Other Axes

  • Washer method

    When the region doesn't touch the axis, each slice is a washer. Volume=π∫(R2−r2) dx\text{Volume} = \pi \int (R^2 - r^2)\,dx, with R the outer radius and r the inner radius.

    Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis

  • Outer and inner radius

    The outer radius R reaches the curve farther from the axis; the inner radius r reaches the curve closer to it.

    Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis

  • Washer mistake to avoid

    Subtract the squares, not the radii: π(R2−r2)\pi(R^2 - r^2), never π(R−r)2\pi(R - r)^2.

    Topic 8.11: Volume with Washer Method: Revolving Around the x- or y-Axis

  • Washers about another line

    Measure both radii from the axis. For y = −2 below the region, a curve y = f(x) gives radius f(x) + 2.

    Topic 8.12: Volume with Washer Method: Revolving Around Other Axes

  • Arc length of a function

    The length of y = f(x) from x = a to x = b is ∫ab1+(f′(x))2 dx\int_a^b \sqrt{1 + (f'(x))^2}\,dx. Many of these need a calculator.

    Topic 8.13: The Arc Length of a Smooth, Planar Curve and Distance Traveled

  • Smooth curve (for arc length)

    A curve is smooth when f′ is continuous on [a, b]. That's the condition for using the arc length integral.

    Topic 8.13: The Arc Length of a Smooth, Planar Curve and Distance Traveled

  • Where the arc length formula comes from

    Each tiny piece of the curve is a hypotenuse: (dx)2+(dy)2=1+(dydx)2 dx\sqrt{(dx)^2 + (dy)^2} = \sqrt{1 + \left(\frac{dy}{dx}\right)^2}\,dx. Add up all the pieces.

    Topic 8.13: The Arc Length of a Smooth, Planar Curve and Distance Traveled