AP® Calculus BC Unit 7 flashcardsDifferential Equations
36 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 36
- Due
- 36
- Mastered
- 0 / 36
This card: New
Flip the card before you rate it.
Differential equation
An equation that includes a derivative, like . It tells you how a quantity changes, and its solutions are functions, not numbers.
Topic 7.1: Modeling Situations with Differential Equations
Rate proportional to the amount
"The rate of change of y is proportional to y" means for some constant k. The bigger y is, the faster it changes.
Topic 7.1: Modeling Situations with Differential Equations
Constant of proportionality
The fixed number k in a model like . If k > 0 the quantity grows; if k < 0 it shrinks.
Topic 7.1: Modeling Situations with Differential Equations
Rate inversely proportional to the amount
"The rate of change of y is inversely proportional to y" means . The bigger y gets, the slower it changes.
Topic 7.1: Modeling Situations with Differential Equations
Newton's law of cooling
An object's temperature T changes at a rate proportional to its gap from room temperature A: , with k < 0. Hot soup cools fast at first, then slowly.
Topic 7.1: Modeling Situations with Differential Equations
Solution of a differential equation
A function that makes the equation true for every x in an interval when you substitute it and its derivatives in.
Topic 7.2: Verifying Solutions for Differential Equations
Verifying a solution
Find the derivatives the equation needs, then substitute them and the function into both sides. If the sides match for every x, it's a solution.
Topic 7.2: Verifying Solutions for Differential Equations
General solution
The whole family of solutions, written with a constant C, like for . Each value of C gives a different curve.
Topic 7.2: Verifying Solutions for Differential Equations
Slope field
A grid of short segments. The segment at each point (x, y) has the slope that the differential equation gives for at that point.
Topic 7.3: Sketching Slope Fields
Sketching a slope field
At each grid point, plug x and y into and draw a short segment with that slope: flat for 0, rising for positive, falling for negative.
Topic 7.3: Sketching Slope Fields
Horizontal segments in a slope field
Segments are flat wherever . Set the right side of the equation equal to 0 to find those points. Often they form a whole line.
Topic 7.3: Sketching Slope Fields
Slope field for dy/dx = f(x)
When depends only on x, every segment in a vertical column has the same slope, and the solution curves are vertical shifts of each other.
Topic 7.3: Sketching Slope Fields
Slope field for dy/dx = g(y)
When depends only on y, every segment in a horizontal row has the same slope, and the solution curves are horizontal shifts of each other.
Topic 7.3: Sketching Slope Fields
Solution curve
The graph of one particular solution. In a slope field it follows the segments, matching the slope at every point it passes through.
Topic 7.4: Reasoning Using Slope Fields
Initial condition
A known point on the solution, like y(0) = 3. It picks out the one solution curve, and the one value of C, that goes through that point.
Topic 7.4: Reasoning Using Slope Fields
Equilibrium solution
A constant solution y = c, where for every x. Its segments form a flat row in the slope field, and nearby curves may move toward it or away.
Topic 7.4: Reasoning Using Slope Fields
Matching a slope field to an equation
Check where slopes are 0, positive and negative, and whether slopes change along rows (depends on x) or columns (depends on y). Rule out equations that don't fit.
Topic 7.4: Reasoning Using Slope Fields
Second derivative from a differential equation
Differentiate with respect to x, treating y as a function of x, then substitute back in. The sign of tells you the concavity.
Topic 7.4: Reasoning Using Slope Fields
Euler's method
A way to estimate a solution step by step. From a known point, follow the tangent line for a short step, find the new slope there, and repeat.
Topic 7.5: Approximating Solutions Using Euler's Method
Euler's method formula
, and new x = old x + Δx. Repeat until you reach the x you want.
Topic 7.5: Approximating Solutions Using Euler's Method
Step size (Δx) in Euler's method
The width of each Euler step. Smaller steps usually give a better estimate but take more steps to reach the same x.
Topic 7.5: Approximating Solutions Using Euler's Method
Euler's method and concavity
If the solution curve is concave up, Euler's method underestimates, since tangent lines sit below the curve. If it's concave down, it overestimates.
Topic 7.5: Approximating Solutions Using Euler's Method
Separable differential equation
One you can rewrite with only y's and dy on one side and only x's and dx on the other. Example: becomes .
Topic 7.6: Finding General Solutions Using Separation of Variables
Separation of variables
Move every y (with dy) to one side and every x (with dx) to the other, integrate both sides, and then solve for y if you can.
Topic 7.6: Finding General Solutions Using Separation of Variables
One constant after separating
When you integrate both sides of a separated equation, one C on the x side is enough. Two constants would just combine into one.
Topic 7.6: Finding General Solutions Using Separation of Variables
Exponentiating ln|y| = kx + C
Raise e to both sides: , so with A a constant. The C ends up multiplying, not added on the end.
Topic 7.6: Finding General Solutions Using Separation of Variables
Particular solution
The one solution that fits an initial condition. Plug the given point in, right after you integrate, to solve for C.
Topic 7.7: Finding Particular Solutions Using Initial Conditions and Separation of Variables
Initial value problem
A differential equation together with an initial condition, like with y(0) = 5. Its answer is one particular solution.
Topic 7.7: Finding Particular Solutions Using Initial Conditions and Separation of Variables
Domain of a particular solution
The interval containing the initial x where the solution is defined and differentiable. Leave out x-values that cause division by 0, square roots of negatives or logs of non-positives.
Topic 7.7: Finding Particular Solutions Using Initial Conditions and Separation of Variables
Exponential model dy/dt = ky
If , then , where y₀ is the amount at t = 0. It grows when k > 0 and decays toward 0 when k < 0.
Topic 7.8: Exponential Models with Differential Equations
Finding the growth constant k
Use two values of . For example, if y doubles in 5 hours, , so . The units of k are 1 over time.
Topic 7.8: Exponential Models with Differential Equations
Half-life
The time for a decaying amount to fall to half. For with k < 0, the half-life is , no matter how much you start with.
Topic 7.8: Exponential Models with Differential Equations
Doubling time
The time for a growing amount to double. For with k > 0, the doubling time is .
Topic 7.8: Exponential Models with Differential Equations
Logistic differential equation
, with k > 0. Growth is close to exponential while P is small and slows down as P nears L.
Topic 7.9: Logistic Models with Differential Equations
Carrying capacity
The limit L in a logistic model. For any positive starting value, P(t) → L as t → ∞. If P starts above L, it decreases toward L.
Topic 7.9: Logistic Models with Differential Equations
Fastest logistic growth
In a logistic model, is greatest when , half the carrying capacity. That's the inflection point of the solution curve.
Topic 7.9: Logistic Models with Differential Equations