AP® Calculus BC Unit 6 flashcardsIntegration and Accumulation of Change
38 cards · about 10 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 38
- Due
- 38
- Mastered
- 0 / 38
This card: New
Flip the card before you rate it.
Accumulation of change
The area between a rate's graph and the horizontal axis is the net change in the amount. Area below the axis counts as negative. Units: rate units × input units (gal/min × min = gal).
Topic 6.1: Exploring Accumulations of Change
Left Riemann sum
An area estimate using rectangles whose heights are the function's values at the left end of each subinterval.
Topic 6.2: Approximating Areas with Riemann Sums
Right Riemann sum
An area estimate using rectangles whose heights are the function's values at the right end of each subinterval.
Topic 6.2: Approximating Areas with Riemann Sums
Midpoint Riemann sum
An area estimate using rectangles whose heights are the function's values at the middle of each subinterval.
Topic 6.2: Approximating Areas with Riemann Sums
Trapezoidal sum
An area estimate using trapezoids: each piece is . It equals the average of the left and right sums.
Topic 6.2: Approximating Areas with Riemann Sums
Left and right sums: too high or too low?
If f is increasing, a left sum underestimates and a right sum overestimates. If f is decreasing, it's the other way around.
Topic 6.2: Approximating Areas with Riemann Sums
Midpoint and trapezoidal sums: too high or too low?
If f is concave up, a trapezoidal sum overestimates and a midpoint sum underestimates. If f is concave down, it's the other way around.
Topic 6.2: Approximating Areas with Riemann Sums
Definite integral (limit definition)
is the limit of Riemann sums as the number of subintervals goes to infinity and their widths shrink to 0.
Topic 6.3: Riemann Sums, Summation Notation, and Definite Integral Notation
Δx in a Riemann sum
The width of each subinterval. With n equal pieces on [a, b], .
Topic 6.3: Riemann Sums, Summation Notation, and Definite Integral Notation
Right Riemann sum in sigma notation
, with . Its limit as n → ∞ is .
Topic 6.3: Riemann Sums, Summation Notation, and Definite Integral Notation
Accumulation function
A function like . It gives the signed area under f from a up to x, so g(a) = 0.
Topic 6.4: The Fundamental Theorem of Calculus and Accumulation Functions
Fundamental Theorem of Calculus (derivative form)
If f is continuous, then . The derivative of an accumulation function is the function inside.
Topic 6.4: The Fundamental Theorem of Calculus and Accumulation Functions
FTC with a function as the upper limit
. Plug in the upper limit, then multiply by its derivative (chain rule).
Topic 6.4: The Fundamental Theorem of Calculus and Accumulation Functions
Increasing accumulation function
Since g′(x) = f(x), increases where f is positive and decreases where f is negative.
Topic 6.5: Interpreting the Behavior of Accumulation Functions Involving Area
Extrema of an accumulation function
has a relative max where f changes from positive to negative, and a relative min where f changes from negative to positive.
Topic 6.5: Interpreting the Behavior of Accumulation Functions Involving Area
Concavity of an accumulation function
g″ = f′, so g is concave up where f is increasing and concave down where f is decreasing. Inflection points of g are where f has a relative max or min.
Topic 6.5: Interpreting the Behavior of Accumulation Functions Involving Area
Reversing the limits of integration
. Also, an integral from a to a is 0.
Topic 6.6: Applying Properties of Definite Integrals
Additivity of definite integrals
You can split an interval at any point c: .
Topic 6.6: Applying Properties of Definite Integrals
Sum and constant multiple rules for integrals
, and . There's no similar rule for products or quotients.
Topic 6.6: Applying Properties of Definite Integrals
Definite integral by geometry
When the graph is made of lines and circle pieces, find the integral from areas of triangles, rectangles and semicircles, counting area below the axis as negative.
Topic 6.6: Applying Properties of Definite Integrals
Fundamental Theorem of Calculus (evaluation form)
If f is continuous on [a, b] and F′ = f, then . Any antiderivative works.
Topic 6.7: The Fundamental Theorem of Calculus and Definite Integrals
Antiderivative
A function F whose derivative is f. If F is one antiderivative, every other one is F + C for some constant C.
Topic 6.8: Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
Constant of integration (+C)
The C in . It's there because constants vanish when you differentiate. Find it from a known point.
Topic 6.8: Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
Power rule for integrals
, as long as n ≠ −1. Rewrite roots and fractions as powers first.
Topic 6.8: Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
Integral of 1/x
. This covers the one power the power rule can't handle, n = −1.
Topic 6.8: Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
Basic exponential and trig integrals
, , , and .
Topic 6.8: Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
u-substitution
Reverses the chain rule. Pick u as an inner expression whose derivative also appears, rewrite everything in u and du, integrate, then put x back.
Topic 6.9: Integrating Using Substitution
Changing limits in u-substitution
In a definite integral, change the x-limits to u-limits with u = g(x). Then you don't need to switch back to x at the end.
Topic 6.9: Integrating Using Substitution
Long division before integrating
If the top of a rational function has degree at least the bottom's, divide first. You get a polynomial plus a remainder fraction that's easier to integrate.
Topic 6.10: Integrating Functions Using Long Division and Completing the Square
Arctangent integral
. With a = 1 it's .
Topic 6.10: Integrating Functions Using Long Division and Completing the Square
Completing the square to integrate
Rewrite a quadratic with no real roots as (x + h)² + k, then substitute u = x + h to get an arctangent form.
Topic 6.10: Integrating Functions Using Long Division and Completing the Square
Integration by parts
. It reverses the product rule and handles integrals like , or .
Topic 6.11: Integrating Using Integration by Parts
Choosing u in integration by parts
Pick u as the part that gets simpler when you differentiate it, like x or ln x. Pick dv as something you can integrate, like eˣ or sin x.
Topic 6.11: Integrating Using Integration by Parts
Partial fraction decomposition
Splitting a fraction whose denominator has distinct linear factors into pieces like . Each piece integrates to a natural log.
Topic 6.12: Integrating Using Linear Partial Fractions
Improper integral
A definite integral with an infinite limit or an integrand that blows up on the interval. Replace the trouble spot with a variable and take a limit.
Topic 6.13: Evaluating Improper Integrals
Convergent vs. divergent improper integral
If the limit is a finite number, the improper integral converges to it. If the limit is infinite or doesn't exist, it diverges.
Topic 6.13: Evaluating Improper Integrals
p-integral
converges when p > 1 and diverges when p ≤ 1.
Topic 6.13: Evaluating Improper Integrals
Choosing an integration technique
First try a basic rule or rewriting with algebra. If that doesn't work, look for a u-substitution, long division or completing the square.
Topic 6.14: Selecting Techniques for Antidifferentiation