Skip to main content

AP® Calculus BC Unit 5 flashcardsAnalytical Applications of Differentiation

38 cards · about 10 minutes for the whole deck

Flashcard drill

Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.

Position
1 / 38
Due
38
Mastered
0 / 38
Saved on this device · Sign in to sync

This card: New

Something wrong with this card?

What's wrong?

Please don't include personal details.

Flip the card before you rate it.

  • Mean Value Theorem

    If f is continuous on [a, b] and differentiable on (a, b), then f′(c)=f(b)−f(a)b−af'(c) = \dfrac{f(b) - f(a)}{b - a} for some c in (a, b). Somewhere, the tangent slope matches the secant slope.

    Topic 5.1: Using the Mean Value Theorem

  • Checking the MVT conditions

    Before you use the MVT, say that f is continuous on the closed interval and differentiable on the open one. A corner, cusp, jump or vertical tangent inside breaks it.

    Topic 5.1: Using the Mean Value Theorem

  • Rolle's Theorem

    A special case of the MVT: if f is continuous on [a, b], differentiable on (a, b), and f(a) = f(b), then f′(c) = 0 for some c in (a, b).

    Topic 5.1: Using the Mean Value Theorem

  • Using the MVT with a table

    If f is differentiable and a table gives f(1) = 2 and f(4) = 11, then f′(c)=11−24−1=3f'(c) = \frac{11 - 2}{4 - 1} = 3 for some c in (1, 4). The MVT says c exists, not where it is.

    Topic 5.1: Using the Mean Value Theorem

  • Extreme Value Theorem

    If f is continuous on a closed interval [a, b], then f has both an absolute maximum value and an absolute minimum value on [a, b].

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • When the EVT doesn't apply

    Drop either condition and extremes can be missing. f(x) = x on the open interval (0, 1) never reaches a max or min, because the endpoints are left out.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • Critical point

    An x-value in the domain of f where f′(x) = 0 or f′(x) doesn't exist. These are the only places inside an interval where f can have a relative max or min.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • Absolute (global) maximum

    The largest value f reaches on its whole domain or on a given interval: f(c) is the absolute max if f(c) ≥ f(x) for every x there.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • Absolute (global) minimum

    The smallest value f reaches on its whole domain or on a given interval: f(c) is the absolute min if f(c) ≤ f(x) for every x there.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • Relative (local) maximum

    f(c) is a relative max if f(c) ≥ f(x) for every x near c. It's a peak compared with its neighbors, not necessarily the highest point overall.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • Relative (local) minimum

    f(c) is a relative min if f(c) ≤ f(x) for every x near c. It's a valley compared with its neighbors, not necessarily the lowest point overall.

    Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points

  • f′ > 0 on an interval

    If f′(x) > 0 for every x in an interval, then f is increasing on that interval. Its graph rises as you move to the right.

    Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing

  • f′ < 0 on an interval

    If f′(x) < 0 for every x in an interval, then f is decreasing on that interval. Its graph falls as you move to the right.

    Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing

  • Sign chart for f′

    A number line marking the critical points (and any x where f is undefined), with the sign of f′ tested on each piece between them. It shows where f rises and falls.

    Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing

  • First Derivative Test

    At a critical point c: if f′ changes from positive to negative, f has a relative max; from negative to positive, a relative min; if f′ doesn't change sign, neither.

    Topic 5.4: Using the First Derivative Test to Determine Relative (Local) Extrema

  • Critical point with no sign change

    If f′ has the same sign on both sides of c, there's no relative extremum at c. Example: f(x) = x³ has f′(0) = 0 but keeps increasing through 0.

    Topic 5.4: Using the First Derivative Test to Determine Relative (Local) Extrema

  • Candidates Test

    Also called the Closed Interval Method. For a continuous f on [a, b], evaluate f at every critical point in (a, b) and at a and b. Largest output = absolute max; smallest = absolute min.

    Topic 5.5: Using the Candidates Test to Determine Absolute (Global) Extrema

  • Endpoint extremum

    On a closed interval, the absolute max or min can be at an endpoint, even if f′ isn't 0 there. That's why the Candidates Test always checks both endpoints.

    Topic 5.5: Using the Candidates Test to Determine Absolute (Global) Extrema

  • Concave up

    The graph bends upward like a cup. This happens where f′ is increasing, which is where f″ > 0. Tangent lines lie below the curve.

    Topic 5.6: Determining Concavity of Functions over Their Domains

  • Concave down

    The graph bends downward like a cap. This happens where f′ is decreasing, which is where f″ < 0. Tangent lines lie above the curve.

    Topic 5.6: Determining Concavity of Functions over Their Domains

  • Point of inflection

    A point where the graph of a continuous f changes concavity, from up to down or down to up. There, f″ changes sign and f′ switches between increasing and decreasing.

    Topic 5.6: Determining Concavity of Functions over Their Domains

  • f″(c) = 0 without an inflection point

    f″ = 0 isn't enough. f(x) = x⁴ has f″(0) = 0, but f″ ≥ 0 on both sides, so the graph is concave up on both sides and there's no inflection point at 0.

    Topic 5.6: Determining Concavity of Functions over Their Domains

  • Second Derivative Test

    If f′(c) = 0 and f″(c) > 0, f has a relative min at c. If f′(c) = 0 and f″(c) < 0, f has a relative max at c.

    Topic 5.7: Using the Second Derivative Test to Determine Extrema

  • Inconclusive Second Derivative Test

    If f′(c) = 0 and f″(c) = 0, the test tells you nothing: x⁴ has a min at 0, −x⁴ a max, and x³ neither. Use the First Derivative Test instead.

    Topic 5.7: Using the Second Derivative Test to Determine Extrema

  • Only one critical point

    If a continuous f has just one critical point on an interval, and it's a relative max (or min), then it's also the absolute max (or min) on that interval.

    Topic 5.7: Using the Second Derivative Test to Determine Extrema

  • Reading f′ from the graph of f

    Where f has a horizontal tangent, f′ = 0. Where f rises, f′ > 0; where f falls, f′ < 0. The steeper the graph of f, the farther f′ is from 0.

    Topic 5.8: Sketching Graphs of Functions and Their Derivatives

  • Corner or cusp on the graph of f

    At a sharp corner or cusp, f′ doesn't exist, so the graph of f′ has a break there. If f is defined at that x, it's still a critical point.

    Topic 5.8: Sketching Graphs of Functions and Their Derivatives

  • Extrema of f from the graph of f′

    f has a relative max where the graph of f′ crosses the x-axis from above to below, and a relative min where it crosses from below to above. Touching without crossing gives neither.

    Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative

  • Inflection points of f from the graph of f′

    Where the graph of f′ has a relative max or min (it switches between rising and falling), the graph of f has an inflection point.

    Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative

  • Signs of f′ and f″ together

    f′ > 0, f″ > 0: rising faster and faster. f′ > 0, f″ < 0: rising but leveling off. f′ < 0, f″ > 0: falling but leveling off. f′ < 0, f″ < 0: falling faster.

    Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative

  • Optimization

    Finding the largest or smallest possible value of a quantity, like area, cost or distance, by writing it as a function and finding its absolute max or min.

    Topic 5.10: Introduction to Optimization Problems

  • Objective function

    The function for the quantity you want to maximize or minimize, written in one variable. For an open box cut from a 20-inch square, V(x) = x(20 − 2x)².

    Topic 5.10: Introduction to Optimization Problems

  • Constraint

    A fixed fact that links the variables, like a set perimeter, volume or budget. You use it to rewrite the objective function in one variable.

    Topic 5.10: Introduction to Optimization Problems

  • Domain in an optimization problem

    The x-values that make sense in context, like lengths that must be positive. If the domain is a closed interval, its endpoints are candidates too.

    Topic 5.10: Introduction to Optimization Problems

  • Justifying an optimum

    Show your critical point really gives the max or min: use the Candidates Test, a sign chart of f′, or the only-one-critical-point rule. Then answer in context, with units.

    Topic 5.11: Solving Optimization Problems

  • Highest or lowest point on an implicit curve

    At a point where dydx=0\frac{dy}{dx} = 0, find d2ydx2\frac{d^2y}{dx^2} there. If it's negative, y has a local max at that point; if it's positive, a local min.

    Topic 5.12: Exploring Behaviors of Implicit Relations

  • Tangent with a given slope (implicit curve)

    To find where the tangent has slope m, set dydx=m\frac{dy}{dx} = m and solve it together with the curve's equation. You need both, since dydx\frac{dy}{dx} uses x and y.

    Topic 5.12: Exploring Behaviors of Implicit Relations

  • Concavity of an implicit curve

    Differentiate dydx\frac{dy}{dx} again to get d2ydx2\frac{d^2y}{dx^2}, then substitute the expression for dydx\frac{dy}{dx} back in. Its sign at a point tells you if the curve is concave up or down there.

    Topic 5.12: Exploring Behaviors of Implicit Relations