AP® Calculus BC Unit 4 flashcardsContextual Applications of Differentiation
36 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 36
- Due
- 36
- Mastered
- 0 / 36
This card: New
Flip the card before you rate it.
Derivative in context
f′(a) tells you how fast the output is changing at the moment the input is a. A full answer names the quantity, the moment, rising or falling, and the units.
Topic 4.1: Interpreting the Meaning of the Derivative in Context
Units of a derivative
Output units per input unit. If V is in liters and t is in minutes, then V′(t) is in liters per minute.
Topic 4.1: Interpreting the Meaning of the Derivative in Context
Units of a second derivative
Output units per input unit per input unit, like °F per minute per minute. It tells you how fast the rate itself is changing.
Topic 4.1: Interpreting the Meaning of the Derivative in Context
Rate at an instant vs. total change
W′(5) = −3 means W is dropping at 3 units per minute right at t = 5. It does not mean W dropped by 3 in total.
Topic 4.1: Interpreting the Meaning of the Derivative in Context
Position function x(t)
Tells you where a particle is on a line at time t. Its derivative is velocity and its second derivative is acceleration.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Velocity (straight-line motion)
v(t) = x′(t), the rate of change of position. Positive means moving right (or up); negative means moving left (or down).
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Acceleration (straight-line motion)
a(t) = v′(t) = x″(t), the rate of change of velocity. Its units are distance per time per time, like m/s².
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Speed
The absolute value of velocity, |v(t)|. Speed is never negative: a velocity of −5 m/s is a speed of 5 m/s.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Particle at rest
A particle is at rest at any time when its velocity is 0, that is, v(t) = 0.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Particle changes direction
Happens where v(t) changes sign, not just anywhere v(t) = 0. Check the sign of v on both sides of each zero.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Speeding up
Speed is increasing when velocity and acceleration have the same sign: both positive or both negative.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Slowing down
Speed is decreasing when velocity and acceleration have opposite signs. A negative acceleration alone doesn't mean slowing down.
Topic 4.2: Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Marginal cost
C′(x), the derivative of the cost function. It estimates the cost of making one more item after x items: C(x + 1) − C(x) ≈ C′(x).
Topic 4.3: Rates of Change in Applied Contexts Other Than Motion
Marginal revenue
R′(x), the derivative of the revenue function. It estimates the extra money you take in from selling one more item after x items.
Topic 4.3: Rates of Change in Applied Contexts Other Than Motion
Rate in minus rate out
If something flows in at rate R(t) and out at rate D(t), the amount changes at R(t) − D(t). Positive means the amount is growing.
Topic 4.3: Rates of Change in Applied Contexts Other Than Motion
Related rates
Problems where two or more quantities change over time and are linked by an equation. Differentiate the equation with respect to t to link their rates.
Topic 4.4: Introduction to Related Rates
Differentiating with respect to time
Each changing variable picks up its own rate by the chain rule: , not just 2r.
Topic 4.4: Introduction to Related Rates
Rate of change of a sphere's volume
From , you get .
Topic 4.4: Introduction to Related Rates
Rate of change of a circle's area
From , you get .
Topic 4.4: Introduction to Related Rates
Constants in related rates
A quantity that never changes, like a ladder's length, has rate 0, so you can plug it in early. Anything that changes must stay a variable.
Topic 4.4: Introduction to Related Rates
Related rates steps
Draw and label a picture, write an equation linking the quantities, differentiate with respect to t, then plug in that instant's values and solve.
Topic 4.5: Solving Related Rates Problems
Plug in after differentiating
Substitute the values for the instant only after you take . Plugging in a changing value first makes it a constant and wipes out its rate.
Topic 4.5: Solving Related Rates Problems
Pythagorean related rates
For a right triangle with legs x and y and hypotenuse z, x² + y² = z² gives .
Topic 4.5: Solving Related Rates Problems
Similar triangles in related rates
Use matching ratios, like for a cone, to write one variable in terms of another before you differentiate.
Topic 4.5: Solving Related Rates Problems
Sign of a rate in related rates
A quantity that is shrinking has a negative rate. If a balloon loses air at 5 cm³/s, use .
Topic 4.5: Solving Related Rates Problems
Angle related rates
Link the angle to the sides with a trig function, like , then differentiate: . Work in radians.
Topic 4.5: Solving Related Rates Problems
Local linearity
Zoom in far enough on a differentiable function and its graph looks like its tangent line. That's why the tangent line gives good estimates nearby.
Topic 4.6: Approximating Values of a Function Using Local Linearity and Linearization
Linearization
L(x) = f(a) + f′(a)(x − a), the tangent line at x = a, used to estimate f(x) for x close to a.
Topic 4.6: Approximating Values of a Function Using Local Linearity and Linearization
Estimating f(a + h) with a tangent line
Use f(a + h) ≈ f(a) + f′(a) · h. The estimate is usually better the smaller h is.
Topic 4.6: Approximating Values of a Function Using Local Linearity and Linearization
Tangent line underestimate
If f is concave up near a (f″ > 0), the curve bends above its tangent line, so the tangent line estimate is too low.
Topic 4.6: Approximating Values of a Function Using Local Linearity and Linearization
Tangent line overestimate
If f is concave down near a (f″ < 0), the curve bends below its tangent line, so the tangent line estimate is too high.
Topic 4.6: Approximating Values of a Function Using Local Linearity and Linearization
L'Hospital's Rule
If gives 0/0 or ∞/∞, it equals , as long as that new limit exists (or is ∞ or −∞).
Topic 4.7: Using L'Hospital's Rule for Determining Limits of Indeterminate Forms
Forms where L'Hospital's Rule applies
Only 0/0 and ∞/∞ (signs on ∞ can vary). Check the form first: if substitution gives something like 0/1, that's already the answer.
Topic 4.7: Using L'Hospital's Rule for Determining Limits of Indeterminate Forms
L'Hospital's Rule is not the quotient rule
Differentiate the top and the bottom separately to get . Don't use the quotient rule on f/g.
Topic 4.7: Using L'Hospital's Rule for Determining Limits of Indeterminate Forms
Using L'Hospital's Rule more than once
If f′/g′ still gives 0/0 or ∞/∞, apply the rule again. Check the form every time before you do.
Topic 4.7: Using L'Hospital's Rule for Determining Limits of Indeterminate Forms
L'Hospital's Rule with values at a point
If f(a) = g(a) = 0 and f′, g′ are continuous with g′(a) ≠ 0, then .
Topic 4.7: Using L'Hospital's Rule for Determining Limits of Indeterminate Forms