AP® Calculus BC Unit 10 flashcardsInfinite Sequences and Series
37 cards · about 9 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 37
- Due
- 37
- Mastered
- 0 / 37
This card: New
Flip the card before you rate it.
Sequence
An ordered list of numbers a₁, a₂, a₃, …. It converges if the terms approach one finite number as n → ∞.
Topic 10.1: Defining Convergent and Divergent Infinite Series
Infinite series
The sum of all the terms of a sequence, written . It might add up to a finite number or it might not.
Topic 10.1: Defining Convergent and Divergent Infinite Series
Partial sum
Sₙ = a₁ + a₂ + ⋯ + aₙ, the sum of just the first n terms. A series is really the limit of its partial sums.
Topic 10.1: Defining Convergent and Divergent Infinite Series
Convergent series
A series whose partial sums Sₙ approach a finite number S. You say the series converges to S, and S is its sum.
Topic 10.1: Defining Convergent and Divergent Infinite Series
Divergent series
A series whose partial sums don't approach a finite number. They might grow forever or bounce around.
Topic 10.1: Defining Convergent and Divergent Infinite Series
Geometric series
A series where each term is the one before times the same ratio r. Example: .
Topic 10.2: Working with Geometric Series
Sum of a geometric series
If , the series converges to , where a is the first term. If , it diverges.
Topic 10.2: Working with Geometric Series
nth term test for divergence
If isn't 0 (or doesn't exist), diverges. If , the test is inconclusive, so you need another test.
Topic 10.3: The nth Term Test for Divergence
Integral test
If f is positive, continuous and decreasing for x ≥ k and aₙ = f(n), then and both converge or both diverge.
Topic 10.4: Integral Test for Convergence
Integral test value vs. series sum
When the integral converges, its value is not the sum of the series. The integral test only tells you whether the series converges.
Topic 10.4: Integral Test for Convergence
p-series
A series . It converges if p > 1 and diverges if p ≤ 1. It's a handy benchmark for comparison tests.
Topic 10.5: Harmonic Series and p-Series
Harmonic series
, the p-series with p = 1. It diverges, even though its terms approach 0.
Topic 10.5: Harmonic Series and p-Series
Direct comparison test
For positive terms with aₙ ≤ bₙ: if converges, so does ; if diverges, so does . Smaller than divergent proves nothing.
Topic 10.6: Comparison Tests for Convergence
Limit comparison test
For positive terms, if is a positive, finite number, then and both converge or both diverge.
Topic 10.6: Comparison Tests for Convergence
Choosing a comparison series
Keep the highest powers on top and bottom. acts like , so compare it with .
Topic 10.6: Comparison Tests for Convergence
Alternating series
A series whose terms switch signs, like with every bₙ > 0. Example: .
Topic 10.7: Alternating Series Test for Convergence
Alternating series test
converges if the sizes bₙ decrease (at least eventually) and .
Topic 10.7: Alternating Series Test for Convergence
Alternating harmonic series
. It converges by the alternating series test, but only conditionally, since diverges.
Topic 10.7: Alternating Series Test for Convergence
Ratio test
Find . If L < 1, converges absolutely; if L > 1, it diverges; if L = 1, the test tells you nothing.
Topic 10.8: Ratio Test for Convergence
When to use the ratio test
Try it when the terms have factorials or powers like 3ⁿ. It fails (L = 1) for p-series and rational functions of n.
Topic 10.8: Ratio Test for Convergence
Absolute convergence
converges absolutely if converges. Then converges too, no matter how the signs fall.
Topic 10.9: Determining Absolute or Conditional Convergence
Conditional convergence
converges, but diverges. The alternating harmonic series is the classic example.
Topic 10.9: Determining Absolute or Conditional Convergence
Alternating series error bound
If an alternating series passes the alternating series test, stopping after n terms leaves an error no bigger than the first term you left out, .
Topic 10.10: Alternating Series Error Bound
Taylor polynomial
The degree-n polynomial that matches f and its first n derivatives at x = a: .
Topic 10.11: Finding Taylor Polynomial Approximations of Functions
Maclaurin polynomial
A Taylor polynomial centered at x = 0. Its coefficient of xⁿ is .
Topic 10.11: Finding Taylor Polynomial Approximations of Functions
Taylor coefficient
The number in front of (x − a)ⁿ is . So . Don't forget the n!.
Topic 10.11: Finding Taylor Polynomial Approximations of Functions
Lagrange error bound
For a degree-n Taylor polynomial about a, , where M is the max of between a and x.
Topic 10.12: Lagrange Error Bound
Power series
A series with a variable x, centered at a. It acts like a function on the x-values where it converges.
Topic 10.13: Radius and Interval of Convergence of Power Series
Radius of convergence
The distance R from the center within which a power series converges. You usually find it with the ratio test. R can be 0, a positive number or ∞.
Topic 10.13: Radius and Interval of Convergence of Power Series
Interval of convergence
All x where a power series converges. After finding R, test each endpoint on its own, because it may converge at both, one or neither.
Topic 10.13: Radius and Interval of Convergence of Power Series
Taylor series
The never-ending Taylor polynomial: . Centered at 0, it's called a Maclaurin series.
Topic 10.14: Finding Taylor or Maclaurin Series for a Function
Maclaurin series for eˣ
. It converges for every real x.
Topic 10.14: Finding Taylor or Maclaurin Series for a Function
Maclaurin series for sin x
. Odd powers only; it converges for every x.
Topic 10.14: Finding Taylor or Maclaurin Series for a Function
Maclaurin series for cos x
. Even powers only; it converges for every x.
Topic 10.14: Finding Taylor or Maclaurin Series for a Function
Maclaurin series for 1/(1 − x)
, a geometric series. It converges only for .
Topic 10.14: Finding Taylor or Maclaurin Series for a Function
Substituting into a known series
Replace x with an expression to get a new series. For , put −x² into : , for .
Topic 10.15: Representing Functions as Power Series
Term-by-term differentiation and integration
You can differentiate or integrate a power series one term at a time. The radius of convergence stays the same, but the endpoints can change.
Topic 10.15: Representing Functions as Power Series