AP® Calculus AB Unit 5 flashcardsAnalytical Applications of Differentiation
38 cards · about 10 minutes for the whole deck
Flashcard drill
Space flips the card, arrow keys move, and keys 1 to 4 rate how well you knew it.
- Position
- 1 / 38
- Due
- 38
- Mastered
- 0 / 38
This card: New
Flip the card before you rate it.
Mean Value Theorem
If f is continuous on [a, b] and differentiable on (a, b), then for some c in (a, b). Somewhere, the tangent slope matches the secant slope.
Topic 5.1: Using the Mean Value Theorem
Checking the MVT conditions
Before you use the MVT, say that f is continuous on the closed interval and differentiable on the open one. A corner, cusp, jump or vertical tangent inside breaks it.
Topic 5.1: Using the Mean Value Theorem
Rolle's Theorem
A special case of the MVT: if f is continuous on [a, b], differentiable on (a, b), and f(a) = f(b), then f′(c) = 0 for some c in (a, b).
Topic 5.1: Using the Mean Value Theorem
Using the MVT with a table
If f is differentiable and a table gives f(1) = 2 and f(4) = 11, then for some c in (1, 4). The MVT says c exists, not where it is.
Topic 5.1: Using the Mean Value Theorem
Extreme Value Theorem
If f is continuous on a closed interval [a, b], then f has both an absolute maximum value and an absolute minimum value on [a, b].
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
When the EVT doesn't apply
Drop either condition and extremes can be missing. f(x) = x on the open interval (0, 1) never reaches a max or min, because the endpoints are left out.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
Critical point
An x-value in the domain of f where f′(x) = 0 or f′(x) doesn't exist. These are the only places inside an interval where f can have a relative max or min.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
Absolute (global) maximum
The largest value f reaches on its whole domain or on a given interval: f(c) is the absolute max if f(c) ≥ f(x) for every x there.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
Absolute (global) minimum
The smallest value f reaches on its whole domain or on a given interval: f(c) is the absolute min if f(c) ≤ f(x) for every x there.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
Relative (local) maximum
f(c) is a relative max if f(c) ≥ f(x) for every x near c. It's a peak compared with its neighbors, not necessarily the highest point overall.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
Relative (local) minimum
f(c) is a relative min if f(c) ≤ f(x) for every x near c. It's a valley compared with its neighbors, not necessarily the lowest point overall.
Topic 5.2: Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
f′ > 0 on an interval
If f′(x) > 0 for every x in an interval, then f is increasing on that interval. Its graph rises as you move to the right.
Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing
f′ < 0 on an interval
If f′(x) < 0 for every x in an interval, then f is decreasing on that interval. Its graph falls as you move to the right.
Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing
Sign chart for f′
A number line marking the critical points (and any x where f is undefined), with the sign of f′ tested on each piece between them. It shows where f rises and falls.
Topic 5.3: Determining Intervals on Which a Function Is Increasing or Decreasing
First Derivative Test
At a critical point c: if f′ changes from positive to negative, f has a relative max; from negative to positive, a relative min; if f′ doesn't change sign, neither.
Topic 5.4: Using the First Derivative Test to Determine Relative (Local) Extrema
Critical point with no sign change
If f′ has the same sign on both sides of c, there's no relative extremum at c. Example: f(x) = x³ has f′(0) = 0 but keeps increasing through 0.
Topic 5.4: Using the First Derivative Test to Determine Relative (Local) Extrema
Candidates Test
Also called the Closed Interval Method. For a continuous f on [a, b], evaluate f at every critical point in (a, b) and at a and b. Largest output = absolute max; smallest = absolute min.
Topic 5.5: Using the Candidates Test to Determine Absolute (Global) Extrema
Endpoint extremum
On a closed interval, the absolute max or min can be at an endpoint, even if f′ isn't 0 there. That's why the Candidates Test always checks both endpoints.
Topic 5.5: Using the Candidates Test to Determine Absolute (Global) Extrema
Concave up
The graph bends upward like a cup. This happens where f′ is increasing, which is where f″ > 0. Tangent lines lie below the curve.
Topic 5.6: Determining Concavity of Functions over Their Domains
Concave down
The graph bends downward like a cap. This happens where f′ is decreasing, which is where f″ < 0. Tangent lines lie above the curve.
Topic 5.6: Determining Concavity of Functions over Their Domains
Point of inflection
A point where the graph of a continuous f changes concavity, from up to down or down to up. There, f″ changes sign and f′ switches between increasing and decreasing.
Topic 5.6: Determining Concavity of Functions over Their Domains
f″(c) = 0 without an inflection point
f″ = 0 isn't enough. f(x) = x⁴ has f″(0) = 0, but f″ ≥ 0 on both sides, so the graph is concave up on both sides and there's no inflection point at 0.
Topic 5.6: Determining Concavity of Functions over Their Domains
Second Derivative Test
If f′(c) = 0 and f″(c) > 0, f has a relative min at c. If f′(c) = 0 and f″(c) < 0, f has a relative max at c.
Topic 5.7: Using the Second Derivative Test to Determine Extrema
Inconclusive Second Derivative Test
If f′(c) = 0 and f″(c) = 0, the test tells you nothing: x⁴ has a min at 0, −x⁴ a max, and x³ neither. Use the First Derivative Test instead.
Topic 5.7: Using the Second Derivative Test to Determine Extrema
Only one critical point
If a continuous f has just one critical point on an interval, and it's a relative max (or min), then it's also the absolute max (or min) on that interval.
Topic 5.7: Using the Second Derivative Test to Determine Extrema
Reading f′ from the graph of f
Where f has a horizontal tangent, f′ = 0. Where f rises, f′ > 0; where f falls, f′ < 0. The steeper the graph of f, the farther f′ is from 0.
Topic 5.8: Sketching Graphs of Functions and Their Derivatives
Corner or cusp on the graph of f
At a sharp corner or cusp, f′ doesn't exist, so the graph of f′ has a break there. If f is defined at that x, it's still a critical point.
Topic 5.8: Sketching Graphs of Functions and Their Derivatives
Extrema of f from the graph of f′
f has a relative max where the graph of f′ crosses the x-axis from above to below, and a relative min where it crosses from below to above. Touching without crossing gives neither.
Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative
Inflection points of f from the graph of f′
Where the graph of f′ has a relative max or min (it switches between rising and falling), the graph of f has an inflection point.
Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative
Signs of f′ and f″ together
f′ > 0, f″ > 0: rising faster and faster. f′ > 0, f″ < 0: rising but leveling off. f′ < 0, f″ > 0: falling but leveling off. f′ < 0, f″ < 0: falling faster.
Topic 5.9: Connecting a Function, Its First Derivative, and Its Second Derivative
Optimization
Finding the largest or smallest possible value of a quantity, like area, cost or distance, by writing it as a function and finding its absolute max or min.
Topic 5.10: Introduction to Optimization Problems
Objective function
The function for the quantity you want to maximize or minimize, written in one variable. For an open box cut from a 20-inch square, V(x) = x(20 − 2x)².
Topic 5.10: Introduction to Optimization Problems
Constraint
A fixed fact that links the variables, like a set perimeter, volume or budget. You use it to rewrite the objective function in one variable.
Topic 5.10: Introduction to Optimization Problems
Domain in an optimization problem
The x-values that make sense in context, like lengths that must be positive. If the domain is a closed interval, its endpoints are candidates too.
Topic 5.10: Introduction to Optimization Problems
Justifying an optimum
Show your critical point really gives the max or min: use the Candidates Test, a sign chart of f′, or the only-one-critical-point rule. Then answer in context, with units.
Topic 5.11: Solving Optimization Problems
Highest or lowest point on an implicit curve
At a point where , find there. If it's negative, y has a local max at that point; if it's positive, a local min.
Topic 5.12: Exploring Behaviors of Implicit Relations
Tangent with a given slope (implicit curve)
To find where the tangent has slope m, set and solve it together with the curve's equation. You need both, since uses x and y.
Topic 5.12: Exploring Behaviors of Implicit Relations
Concavity of an implicit curve
Differentiate again to get , then substitute the expression for back in. Its sign at a point tells you if the curve is concave up or down there.
Topic 5.12: Exploring Behaviors of Implicit Relations